manualshive.com logo in svg

Intermec ColorCoder V4, Инструкция по установке и эксплуатации, Страница: 58 / 115

Поделиться
Скачать
Intermec ColorCoder V4 Скачать руководство пользователя страница 58

Intermec ColorCoder V4 – Installation & Operation Ed. 1

57

Chapter 5      Printing

As an alternative to printing using the Windows printer driver,
ColorCoder V4 can also print labels stored in memory cards. In this
case, the printer does not need to be connected to a computer.

Memory cards should confirm to JEIDA Ver. 4.0/PCMCIA 1.0 or
JEIDA Ver. 4.1/PCMCIA 2.0 standards. The methods for storing
label layouts in memory cards is outside the scope of this manual.
Consult your local Intermec distributor.

To print a label stored in a memory card, proceed as follows:

1

.

Open the front cover of the printer, insert the appropriate
memory card all the way into the slot to the left of the ink
cartridges, and close the cover.

To eject an inserted memory card, press the button below the
slot.

2

. If READY” is displayed on the display panel, press the <On

Line> key. The display panel shows:

OFF LINE

3

. Press the <Menu> key.

PAPER TYPE

4

. Press the <Cursor right> key twice.

PAPER SET.

5

. Press the <Enter> key.

PRINT PAGES SET.

6

. Press the <Enter> key.

PRINT PAGE=00001

5.5

Printing from
Memory Cards

Содержание ColorCoder V4




















































































































Отзывы:

Нет отзывов