![background image](http://html.mh-extra.com/html/interlogix/ns3550-8t-2s/ns3550-8t-2s_user-manual_2077352163.webp)
Chapter 4: Web management
NS3550-8T-2S Industrial Managed Switch User Manual
161
The page includes the following fields:
Object
Description
Port
The Port column shows the list of ports for which DSCP ingress and egress
settings can be configured.
Ingress
Change ingress translation and classification settings for individual ports.
There are two configuration parameters available in Ingress:
Translate
Classify
Translate
Select the
Translate
check box to enable the Ingress translation.
Classify
Selections are as follows:
Disable
: No Ingress DSCP Classification.
DSCP=0
: Classify if incoming (or translated if enabled) DSCP is 0.
Selected
: Classify only the selected DSCP for which classification is
enabled as specified in the DSCP Translation window for the specific DSCP.
All
: Classify all DSCP.
Egress
Selections for Rewrite are as follows:
Disable
: No egress rewrite.
Enable
: Rewrite enabled without remapping.
Remap DP Unaware
: DSCP from the analyzer is remapped and the frame is
remarked with the remapped DSCP value. The remapped DSCP value is
always taken from the 'DSCP Translation->Egress Remap DP0' table.
Remap DP Aware
: DSCP from the analyzer is remapped and the frame is
remarked with the remapped DSCP value. Depending on the DP level of the
frame, the remapped DSCP value is either taken from the 'DSCP
Translation->Egress Remap DP0' table or from the 'DSCP Translation-
>Egress Remap DP1' table.
Buttons
• Click
Save
to save changes.
• Click
Reset
to undo any changes made locally and revert to previously saved
values.
DSCP-based QoS
The QoS DSCP-Based QoS Ingress Classification page permits configuration of the
basic QoS DSCP-based QoS ingress classification settings for all switches.