6 / 14
P/N 466-5519 • REV 0.01 • 24MAY19
Heat Pump HVAC System Wiring
Figure 7:
Thermostat Wiring connection with heat pump HVAC system
CAUTION:
Typical thermostat wiring colors, verify that original wiring matches. Colors may be different.
Note:
If you get heating when you expected cooling or vice versa, change the Change Over type to the opposite setting.
Thermostat Setup: Heat Pump HVAC Systems
For Single Stage Heat/Cool Systems:
1. Go to the Menu screen by pressing and holding the FAN
button
for 5 seconds.
2. Press the down arrow
to select the SYSTEM menu
and press Select.
Set the following:
x
System Type:
Set to
HEAT PUMP
x
Change Over:
For changeover with cooling systems
(Orange wire): set to
WITH COOL
(most common and
default setting).
For changeover with heating systems (
Brown
wire): set
to
WITH HEAT
.
You must configure the thermostat’s changeover valve
setting to work correctly with your HVAC system.
Check your system information to be sure and note the color
of original thermostat wire and the terminal it was connected
to.
No matter what the old stat connection was (O or B),
connect the wire to the thermostats W2/O terminal.
