manualshive.com logo in svg

Interlogix GE-DSSG-244, Руководство пользователя

Пользовательский мануал для Interlogix GE-DSSG-244 доступен для скачивания бесплатно на нашем веб-сайте. Этот руководство поможет вам установить и настроить ваш продукт для максимальной производительности. Безопасное и надежное оборудование для вашего дома или бизнеса.

Поделиться
Скачать
background image

User’s Manual of NS3601-24P/4S Series 

385

 

SWITCH OPERATION 

Address Table 

The Switch is implemented with an address table. This address table composed of many entries. Each entry is used to store the 
address information of some node in network, including MAC address, port no, etc. This in-formation comes from the learning 
process of Ethernet Switch. 

Learning 

When one packet comes in from any port, the Switch will record the source address, port no. And the other related information 
in address table. This information will be used to decide either forwarding or filtering for future packets. 

Forwarding & Filtering 

When one packet comes from some port of the Ethernet Switching, it will also check the destination address besides the source 
address learning. The Ethernet Switching will lookup the address-table for the destination address. If not found, this packet will 
be forwarded to all the other ports except the port, which this packet comes in. And these ports will transmit this packet to the 
network it connected. If found, and the destination address is located at different port from this packet comes in, the Ethernet 
Switching will forward this packet to the port where this destination address is located according to the information from address 
table. But, if the destination address is located at the same port with this packet comes in, then this packet will be filtered. 
Thereby increasing the network throughput and availability 

Store-and-Forward 

Store-and-Forward is one type of packet-forwarding techniques.  A Store-and-Forward Ethernet Switching stores the incoming 
frame in an internal buffer, do the complete error checking before transmission. Therefore, no error packets occurrence, it is the 
best choice when a network needs efficiency and stability. 
The Ethernet Switch scans the destination address from the packet-header, searches the routing table pro-vided for the 
incoming port and forwards the packet, only if required. The fast forwarding makes the switch attractive for connecting servers 
directly to the network, thereby increasing throughput and availability. How-ever, the switch is most commonly used to segment 
existence hubs, which nearly always improves overall performance. An Ethernet Switching can be easily configured in any 
Ethernet network environment to signifi-cantly boost bandwidth using conventional cabling and adapters. 
Due to the learning function of the Ethernet switching, the source address and corresponding port number of each incoming and 
outgoing packet are stored in a routing table. This information is subsequently used to filter packets whose destination address 
is on the same segment as the source address. This confines network traffic to its respective domain and reduce the overall 
load on the network. 
The Switch performs "Store and forward" therefore, no error packets occur.    More reliably, it reduces the re-transmission rate.   
No packet loss will occur. 

 

Auto-Negotiation 

The STP ports on the Switch have built-in "Auto-negotiation". This technology automatically sets the best possible bandwidth 
when a connection is established with another network device (usually at Power On or Reset). This is done by detect the modes 
and speeds at the second of both device is connected and capable of, both 10Base-T and 100Base-TX devices can connect 
with the port in either Half- or Full-Duplex mode. 
 

If attached device is: 

100Base-TX port will set to: 

10Mbps, no auto-negotiation 

10Mbps. 

10Mbps, with auto-negotiation 

10/20Mbps (10Base-T/Full-Duplex) 

100Mbps, no auto-negotiation 

100Mbps 

100Mbps, with auto-negotiation 

100/200Mbps (100Base-TX/Full-Duplex) 

 
 
 
 
 
 
 
 

Содержание GE-DSSG-244





























































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GE-DSSG-244

PACOM Professional Series Quick Manual preview
Professional Series
Бренд: PACOM Страницы: 15
Parkside POF 1200 A1 Operation Manual preview
POF 1200 A1
Бренд: Parkside Страницы: 55
Parkside POF 1200 A1 Operation And Safety Notes preview
POF 1200 A1
Бренд: Parkside Страницы: 34
3Com NJ220 - IntelliJack Switch User Manual preview
NJ220 - IntelliJack Switch
Бренд: 3Com Страницы: 82
B&B Electronics Conel UR5i v2 Libratum User Manual preview
Conel UR5i v2 Libratum
Бренд: B&B Electronics Страницы: 32
Eaton APS6-400 Series Installation And Operation Manual preview
APS6-400 Series
Бренд: Eaton Страницы: 114
Ubiquiti AmpliFi AFi-G Quick Start Manual preview
AmpliFi AFi-G
Бренд: Ubiquiti Страницы: 20
AMG Systems AMG9240-C User Manual preview
AMG9240-C
Бренд: AMG Systems Страницы: 2
red lion Yaskawa 2000 Information Sheet preview
Yaskawa 2000
Бренд: red lion Страницы: 5
Dahua D-NVR4108HS-4KS2/L Quick Start Manual preview
D-NVR4108HS-4KS2/L
Бренд: Dahua Страницы: 33
Ozenda AR4505GW Instruction Manual preview
AR4505GW
Бренд: Ozenda Страницы: 116
VCS VIP 1000 User Manual preview
VIP 1000
Бренд: VCS Страницы: 118
Observint NVR16 Firmware User Manual preview
NVR16
Бренд: Observint Страницы: 117
Dahua NVRPRO User Manual preview
NVRPRO
Бренд: Dahua Страницы: 113
US Robotics uShare USR8710 User Manual preview
uShare USR8710
Бренд: US Robotics Страницы: 180
ZyXEL Communications Prestige 2864I Getting Started preview
Prestige 2864I
Бренд: ZyXEL Communications Страницы: 8
PairGain 150-2230-01 Quick Installation Manual preview
150-2230-01
Бренд: PairGain Страницы: 48
N-Tron 104TX Specification Sheet preview
104TX
Бренд: N-Tron Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды