manualshive.com logo in svg

Interlogix GE-DSSG-244, Руководство пользователя

Пользовательский мануал для Interlogix GE-DSSG-244 доступен для скачивания бесплатно на нашем веб-сайте. Этот руководство поможет вам установить и настроить ваш продукт для максимальной производительности. Безопасное и надежное оборудование для вашего дома или бизнеса.

Поделиться
Скачать
background image

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual 

     

 

235 

 

also support all aspects of TIA-1057 applicable to Generic Endpoints (Class I), 
and any LLDP-MED Endpoint Device claiming compliance as a Communication 
Device (Class III) will also support all aspects of TIA-1057 applicable to both 
Media Endpoints (Class II) and Generic Endpoints (Class I). 

LLDP-MED Generic Endpoint (Class I)   

The LLDP-MED Generic Endpoint (Class I) definition is applicable to all endpoint 
products that require the base LLDP discovery services defined in TIA-1057, 
however do not support IP media or act as an end-user communication 
appliance. Such devices may include (but are not limited to) IP Communication 
Controllers, other communication related servers, or any device requiring basic 
services as defined in TIA-1057. 
Discovery services defined in this class include LAN configuration, device 
location, network policy, power management, and inventory management. 

LLDP-MED Media Endpoint (Class II)   

The LLDP-MED Media Endpoint (Class II) definition is applicable to all endpoint 
products that have IP media capabilities however may or may not be associated 
with a particular end user. Capabilities include all of the capabilities defined for 
the previous Generic Endpoint Class (Class I), and are extended to include 
aspects related to media streaming. Example product categories expected to 
adhere to this class include (but are not limited to) Voice / Media Gateways, 
Conference Bridges, Media Servers, and similar. 
Discovery services defined in this class include media-type-specific network 
layer policy discovery. 

LLDP-MED Communication Endpoint (Class III)   

The LLDP-MED Communication Endpoint (Class III) definition is applicable to all 
endpoint products that act as end user communication appliances supporting IP 
media. Capabilities include all of the capabilities defined for the previous Generic 
Endpoint (Class I) and Media Endpoint (Class II) classes, and are extended to 
include aspects related to end user devices. Example product categories 
expected to adhere to this class include (but are not limited to) end user 
communication appliances, such as IP Phones, PC-based softphones, or other 
communication appliances that directly support the end user. 
Discovery services defined in this class include provision of location identifier 
(including ECS / E911 information), embedded L2 switch support, inventory 
management 

•

 

LLDP-MED 
Capabilities 

LLDP-MED Capabilities describes the neighbor unit's LLDP-MED capabilities. 
The possible capabilities are: 

1. LLDP-MED capabilities 
2. Network Policy 
3. Location Identification 
4. Extended Power via MDI - PSE 
5. Extended Power via MDI - PD 
6. Inventory 
7. Reserved 

•

 

Application Type 

Application Type indicating the primary function of the application(s) defined for 
this network policy, advertised by an Endpoint or Network Connectivity Device. 
The poosible application types are shown below. 

Voice

 - for use by dedicated IP Telephony handsets and other similar appliances 

supporting interactive voice services. These devices are typically deployed on a 
separate VLAN for ease of deployment and enhanced security by isolation from 
data applications. 

Voice Signaling

 - for use in network topologies that require a different policy for 

the voice signaling than for the voice media. 

Guest Voice

 - to support a separate limited feature-set voice service for guest 

users and visitors with their own IP Telephony handsets and other similar 
appliances supporting interactive voice services. 
Guest Voice Signaling - for use in network topologies that require a different 
policy for the guest voice signaling than for the guest voice media. 

Softphone Voice

 - for use by softphone applications on typical data centric 

devices, such as PCs or laptops. 

Video Conferencing

 - for use by dedicated Video Conferencing equipment and 

other similar appliances supporting real-time interactive video/audio services. 

Streaming Video

 - for use by broadcast or multicast based video content 

distribution and other similar applications supporting streaming video services 
that require specific network policy treatment. Video applications relying on TCP 

Содержание GE-DSSG-244





























































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GE-DSSG-244

D-Link Verizon DSL-2750B Setup Manual preview
Verizon DSL-2750B
Бренд: D-Link Страницы: 6
D-Link DIR-857 Quick Installation Manual preview
DIR-857
Бренд: D-Link Страницы: 10
D-Link DSL-2740U Quick Installation Manual preview
DSL-2740U
Бренд: D-Link Страницы: 38
TDC Netopia User Manual preview
Netopia
Бренд: TDC Страницы: 27
Panasonic KX-UDS124 Maintenance Tool Manual preview
KX-UDS124
Бренд: Panasonic Страницы: 24
Panasonic i-Pro WV-SP302 Speci?Cations preview
i-Pro WV-SP302
Бренд: Panasonic Страницы: 2
Panasonic BB-HCM381A - Network Camera Troubleshooting Manual preview
BB-HCM381A - Network Camera
Бренд: Panasonic Страницы: 28
Panasonic BB-HCM381A - Network Camera Installation Manual preview
BB-HCM381A - Network Camera
Бренд: Panasonic Страницы: 2
4IPNET WHG301 User Manual preview
WHG301
Бренд: 4IPNET Страницы: 97
H3C NSQ1GT48EA0 Manual preview
NSQ1GT48EA0
Бренд: H3C Страницы: 3
B&B Electronics EIR208 Series Quick Start Manual preview
EIR208 Series
Бренд: B&B Electronics Страницы: 2
Techroutes TSR 2800-30 Hardware Installation Manual preview
TSR 2800-30
Бренд: Techroutes Страницы: 20
ACTi LPR-100 Quick Installation Manual preview
LPR-100
Бренд: ACTi Страницы: 14
Atlantis WebShare 141 WN Quick Start Manual preview
WebShare 141 WN
Бренд: Atlantis Страницы: 78
Allied Telesis AR100 series User Manual preview
AR100 series
Бренд: Allied Telesis Страницы: 128
Alcatel-Lucent 1677 Brochure preview
1677
Бренд: Alcatel-Lucent Страницы: 8
TP-Link Archer C24 Quick Installation Manual preview
Archer C24
Бренд: TP-Link Страницы: 2
Billion BiPAC 7404VGP Specifications preview
BiPAC 7404VGP
Бренд: Billion Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды