manualshive.com logo in svg

Interlogix GE-DSSG-244, Руководство пользователя

Пользовательский мануал для Interlogix GE-DSSG-244 доступен для скачивания бесплатно на нашем веб-сайте. Этот руководство поможет вам установить и настроить ваш продукт для максимальной производительности. Безопасное и надежное оборудование для вашего дома или бизнеса.

Поделиться
Скачать
background image

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual 

     

 

182 

 

•

 

RADIUS-Assigned 
VLAN Enabled 

- When RADIUS-Assigned VLAN is both globally enabled and enabled 

(checked) for a given port, the switch reacts to VLAN ID information 
carried in the RADIUS Access-Accept packet transmitted by the 
RADIUS server when a supplicant is successfully authenticated. If 
present and valid, the port's Port VLAN ID will be changed to this VLAN 
ID, the port will be set to be a member of that VLAN ID, and the port will 
be forced into VLAN unaware mode. Once assigned, all traffic arriving 
on the port will be classified and switched on the RADIUS-assigned 
VLAN ID. 
If (re-)authentication fails or the RADIUS Access-Accept packet no 
longer carries a VLAN ID or it's invalid, or the supplicant is otherwise no 
longer present on the port, the port's VLAN ID is immediately reverted to 
the original VLAN ID (which may be changed by the administrator in the 
meanwhile without affecting the RADIUS-assigned). 
This option is only available for single-client modes, i.e. 

• Port-based 802.1X 
• Single 802.1X

 

For trouble-shooting VLAN assignments, use the 
"Monitor

→

VLANs

→

VLAN Membership and VLAN Port" pages. These 

pages show which modules have (temporarily) overridden the current 
Port VLAN configuration. 

 

RADIUS attributes used in identifying a VLAN ID: 

RFC2868 and RFC3580 form the basis for the attributes used in identifying a 
VLAN ID in an Access-Accept packet. The following criteria are used: 

- The Tunnel-Medium-Type, Tunnel-Type, and Tunnel-Private-Group-ID 

attributes must all be present at least once in the Access-Accept packet. 

- The switch looks for the first set of these attributes that have the same Tag 

value and fulfil the following requirements (if Tag == 0 is used, the 
Tunnel-Private-Group-ID does not need to include a Tag): 

- Value of Tunnel-Medium-Type must be set to "IEEE-802" (ordinal 6). 

- Value of Tunnel-Type must be set to "VLAN" (ordinal 13). 

- Value of Tunnel-Private-Group-ID must be a string of ASCII chars in the 

range '0' - '9', which is interpreted as a decimal string representing the 
VLAN ID. Leading '0's are discarded. The final value must be in the 
range [1; 4095]. 

•

 

Guest VLAN Enabled 

When Guest VLAN is both globally enabled and enabled (checked) for a given 
port, the switch considers moving the port into the Guest VLAN according to the 
rules outlined below. 
This option is only available for EAPOL-based modes, i.e.: 

• Port-based 802.1X 
• Single 802.1X 
• Multi 802.1X

 

For trouble-shooting VLAN assignments, use the "Monitor

→

VLANs

→

VLAN 

Membership and VLAN Port" pages. These pages show which modules have 
(temporarily) overridden the current Port VLAN configuration. 

Guest VLAN Operation: 

When a Guest VLAN enabled port's link comes up, the switch starts transmitting 
EAPOL Request Identity frames. If the number of transmissions of such frames 
exceeds Max. Reauth. Count and no EAPOL frames have been received in the 
meanwhile, the switch considers entering the Guest VLAN. The interval between 
transmission of EAPOL Request Identity frames is configured with EAPOL 
Timeout. If Allow Guest VLAN if EAPOL Seen is enabled, the port will now be 
placed in the Guest VLAN. If disabled, the switch will first check its history to see 
if an EAPOL frame has previously been received on the port (this history is 
cleared if the port link goes down or the port's Admin State is changed), and if 
not, the port will be placed in the Guest VLAN. Otherwise it will not move to the 
Guest VLAN, but continue transmitting EAPOL Request Identity frames at the 
rate given by EAPOL Timeout. 

Once in the Guest VLAN, the port is considered authenticated, and all attached 
clients on the port are allowed access on this VLAN. The switch will not transmit 

Содержание GE-DSSG-244





























































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GE-DSSG-244

DataRemote CDS-9010 Quick Start Manual preview
CDS-9010
Бренд: DataRemote Страницы: 2
D-Link G416 User Manual preview
G416
Бренд: D-Link Страницы: 176
Brocade Communications Systems NetIron MLXe Series Hardware Installation Manual preview
NetIron MLXe Series
Бренд: Brocade Communications Systems Страницы: 305
ATEN Slideaway CL1008 User Manual preview
Slideaway CL1008
Бренд: ATEN Страницы: 77
M-system M5XSBS Instruction Manual preview
M5XSBS
Бренд: M-system Страницы: 4
Kramer VS-162AVM User Manual preview
VS-162AVM
Бренд: Kramer Страницы: 56
Kasda KE318EU User Manual preview
KE318EU
Бренд: Kasda Страницы: 39
Cradlepoint wipipe CTR350 Quick Start Manual preview
wipipe CTR350
Бренд: Cradlepoint Страницы: 2
Matrix Switch Corporation MSC-2HD1624S Product Manual preview
MSC-2HD1624S
Бренд: Matrix Switch Corporation Страницы: 54
Thecus N2520 series User Manual preview
N2520 series
Бренд: Thecus Страницы: 130
Multi-Link Power Stone Programming Manual preview
Power Stone
Бренд: Multi-Link Страницы: 31
MicroNova O047 Technical Installation Manual preview
O047
Бренд: MicroNova Страницы: 113
H3C MSR 2600 Installation, Quick Start preview
MSR 2600
Бренд: H3C Страницы: 4
Hirschmann 943 221-001 Description And Operating Instructions preview
943 221-001
Бренд: Hirschmann Страницы: 8
ICP DAS USA ZT-2005-C8 User Manual preview
ZT-2005-C8
Бренд: ICP DAS USA Страницы: 60
NetApp StorageGRID Webscale SG5700 Series Install preview
StorageGRID Webscale SG5700 Series
Бренд: NetApp Страницы: 15
Billion MWEB W40 Quick Start Manual preview
MWEB W40
Бренд: Billion Страницы: 20
Crestron C2N-NPA8 Operation Manual preview
C2N-NPA8
Бренд: Crestron Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды