manualshive.com logo in svg

Interlogix GE-DSSG-244, Руководство пользователя

Пользовательский мануал для Interlogix GE-DSSG-244 доступен для скачивания бесплатно на нашем веб-сайте. Этот руководство поможет вам установить и настроить ваш продукт для максимальной производительности. Безопасное и надежное оборудование для вашего дома или бизнеса.

Поделиться
Скачать
background image

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual 

     

 

228 

 

 
The page includes the following fields: 

LLDP Parameters 

Object 

Description 

•

 

Tx Interval

 

The switch is periodically transmitting LLDP frames to its neighbors for having the 
network discovery information up-to-date. The interval between each LLDP 
frame is determined by the 

Tx Interval

 value. Valid values are restricted to 5 - 

32768 seconds. 
Default: 

30

 seconds 

This attribute must comply with the following rule: 

(Transmission Interval * Hold Time Multiplier) 

≤

65536, and Transmission Interval 

>= (4 * Delay Interval)

 

•

 

Tx Hold

 

Each LLDP frame contains information about how long the information in the 
LLDP frame shall be considered valid. The LLDP information valid period is set to 

Tx Hold

 multiplied by 

Tx Interval

 seconds. Valid values are restricted to 2 - 10 

times. 

TTL in seconds is based on the following rule: 

(Transmission Interval * Holdtime Multiplier) 

≤

 65536. 

Therefore, the default TTL is 4*30 = 120 seconds.

 

•

 

Tx Delay

 

If some configuration is changed (e.g. the IP address) a new LLDP frame is 
transmitted, but the time between the LLDP frames will always be at least the 
value of 

Tx Delay

 seconds. 

Tx Delay

 cannot be larger than 1/4 of the 

Tx Interval

 

value. Valid values are restricted to 1 - 8192 seconds. 

This attribute must comply with the rule: 
 

(4 * Delay Interval) 

≤

Transmission Interval

 

•

 

Tx Reinit

 

When a port is disabled, LLDP is disabled or the switch is rebooted a LLDP 
shutdown frame is transmitted to the neighboring units, signaling that the LLDP 
information isn't valid anymore. 

Tx Reinit

 controls the amount of seconds 

between the shutdown frame and a new LLDP initialization. Valid values are 
restricted to 1 - 10 seconds. 

 

LLDP Port Configuration 

The LLDP port settings relate to the currently selected stack unit, as reflected by the page header. 

Object 

Description 

•

 

Port

 

The switch port number of the logical LLDP port. 

•

 

Mode

 

Select LLDP mode.   

Rx only

 The switch will not send out LLDP information, but LLDP information 

from neighbor units is analyzed.   

Tx only

 The switch will drop LLDP information received from neighbors, but will 

send out LLDP information.   

Disabled

 The switch will not send out LLDP information, and will drop LLDP 

information received from neighbors. 

Enabled

 The switch will send out LLDP information, and will analyze LLDP 

information received from neighbors. 

•

 

CDP Aware 

Select CDP awareness.   
The CDP operation is restricted to decoding incoming CDP frames (The switch 
doesn't transmit CDP frames). CDP frames are only decoded if LLDP for the port 
is enabled.   
Only CDP TLVs that can be mapped into a corresponding field in the LLDP 
neighbors table are decoded. All other TLVs are discarded ( Unrecognized CDP 
TLVs and discarded CDP frame are not shown in the LLDP statistic. Only ). CDP 
TLVs are mapped into LLDP neighbors table as shown below.   
CDP TLV "Device ID" is mapped into the LLDP "Chassis ID" field.   
CDP TLV "Address" is mapped into the LLDP "Management Address" field. The 
CDP address TLV can contain multiple addresses, but only the first address is 
shown in the LLDP neighbors table.   

Содержание GE-DSSG-244





























































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GE-DSSG-244

3Com OfficeConnect 1600 Datasheet preview
OfficeConnect 1600
Бренд: 3Com Страницы: 8
3Com 3CRWEASY96A Quick Start Manual preview
3CRWEASY96A
Бренд: 3Com Страницы: 8
B+B SmartWorx UR5i v2 Libratum Start Manual preview
UR5i v2 Libratum
Бренд: B+B SmartWorx Страницы: 8
B+B SmartWorx ICR-1601 Start Manual preview
ICR-1601
Бренд: B+B SmartWorx Страницы: 8
Patton electronics 470 Series User Manual preview
470 Series
Бренд: Patton electronics Страницы: 2
Patton electronics ipRocketLink 3086FR Quick Reference preview
ipRocketLink 3086FR
Бренд: Patton electronics Страницы: 6
Patton electronics 1084 Installation And Operation Manual preview
1084
Бренд: Patton electronics Страницы: 16
Patton electronics IpLink 2884 Getting Started Manual preview
IpLink 2884
Бренд: Patton electronics Страницы: 51
Watchguard XTM 5 Series Hardware Manual preview
XTM 5 Series
Бренд: Watchguard Страницы: 24
Zonet ZEW1505 Quick Installation Manual preview
ZEW1505
Бренд: Zonet Страницы: 10
Samsung NAS Series Hardware User Manual preview
NAS Series
Бренд: Samsung Страницы: 65
Quantum LightSpeed Appliance QLS250 Owner'S Manual preview
LightSpeed Appliance QLS250
Бренд: Quantum Страницы: 12
D-Link DIR-853/EE Quick Installation Manual preview
DIR-853/EE
Бренд: D-Link Страницы: 83
NETGEAR WGR614 - Wireless-G Router Wireless Reference Manual preview
WGR614 - Wireless-G Router Wireless
Бренд: NETGEAR Страницы: 116
TP-Link Archer VR500vd Installation Manual preview
Archer VR500vd
Бренд: TP-Link Страницы: 7
HGST Ultrastar Serv24 S2122-N24-4 Installation Manual preview
Ultrastar Serv24 S2122-N24-4
Бренд: HGST Страницы: 36
Ozenda AR4505GW Instruction Manual preview
AR4505GW
Бренд: Ozenda Страницы: 116
ZyXEL Communications SHD1110 Quick Start Manual preview
SHD1110
Бренд: ZyXEL Communications Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды