manualshive.com logo in svg

Interlogix GE-DSSG-244, Руководство пользователя

Пользовательский мануал для Interlogix GE-DSSG-244 доступен для скачивания бесплатно на нашем веб-сайте. Этот руководство поможет вам установить и настроить ваш продукт для максимальной производительности. Безопасное и надежное оборудование для вашего дома или бизнеса.

Поделиться
Скачать
background image

User’s Manual of NS3601-24P/4S Series 

405

 

U

   

UDP 

 

UDP is an acronym for 

U

ser 

D

atagram 

P

rotocol. It is a communications protocol that uses the Internet Protocol (IP) to 

exchange the messages between computers.   

UDP is an alternative to the Transmission Control Protocol (TCP) that uses the Internet Protocol (IP). Unlike TCP, 
UDP does not provide the service of dividing a message into packet datagrams, and UDP doesn't provide 
reassembling and sequencing of the packets. This means that the application program that uses UDP must be able to 
make sure that the entire message has arrived and is in the right order. Network applications that want to save 
processing time because they have very small data units to exchange may prefer UDP to TCP.   

UDP provides two services not provided by the IP layer. It provides port numbers to help distinguish different user 
requests and, optionally, a checksum capability to verify that the data arrived intact. 

Common network applications that use UDP include the Domain Name System (DNS), streaming media applications 
such as IPTV, Voice over IP (VoIP), and Trivial File Transfer Protocol (TFTP). 

UPnP 

UPnP is an acronym for 

U

niversal 

P

lug and 

P

lay. The goals of UPnP are to allow devices to connect seamlessly and to 

simplify the implementation of networks in the home (data sharing, communications, and entertainment) and in 
corporate environments for simplified installation of computer components   

User Priority 

 

User Priority is a 3-bit field storing the priority level for the 802.1Q frame.   

V

   

VLAN 

 

Virtual LAN. A method to restrict communication between switch ports. VLANs can be used for the following 
applications:  

VLAN unaware switching:

 This is the default configuration. All ports are VLAN unaware with Port VLAN ID 1 and 

members of VLAN 1. This means that MAC addresses are learned in VLAN 1, and the switch does not remove or 
insert VLAN tags. 

VLAN aware switching:

 This is based on the IEEE 802.1Q standard. All ports are VLAN aware. Ports connected to 

VLAN aware switches are members of multiple VLANs and transmit tagged frames. Other ports are members of one 
VLAN, set up with this Port VLAN ID, and transmit untagged frames. 

Provider switching:

 This is also known as Q-in-Q switching. Ports connected to subscribers are VLAN unaware, 

members of one VLAN, and set up with this unique Port VLAN ID. Ports connected to the service provider are VLAN 
aware, members of multiple VLANs, and set up to tag all frames. Untagged frames received on a subscriber port are 
forwarded to the provider port with a single VLAN tag. Tagged frames received on a subscriber port are forwarded to 
the provider port with a double VLAN tag. 

VLAN ID 

 

VLAN ID is a 12-bit field specifying the VLAN to which the frame belongs.   

Voice VLAN 

Voice VLAN is VLAN configured specially for voice traffic. By adding the ports with voice devices attached to voice 
VLAN, we can perform QoS-related configuration for voice data, ensuring the transmission priority of voice traffic and 
voice quality.   

W  

WEP 

WEP is an acronym for 

W

ired 

E

quivalent

 P

rivacy. WEP is a deprecated algorithm to secure IEEE 802.11 wireless 

networks. Wireless networks broadcast messages using radio, so are more susceptible to eavesdropping than wired 
networks. When introduced in 1999, WEP was intended to provide confidentiality comparable to that of a traditional 
wired network (Wikipedia).   

Содержание GE-DSSG-244





























































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GE-DSSG-244

Canon Vb-C60 - Ptz Network Camera Setup Manual preview
Vb-C60 - Ptz Network Camera
Бренд: Canon Страницы: 30
ZETR 25 Installation Manual preview
25
Бренд: ZETR Страницы: 2
CallDirect CD Series At Command Manual preview
CD Series
Бренд: CallDirect Страницы: 33
4RF Aprisa LTE Quick Start Manual preview
Aprisa LTE
Бренд: 4RF Страницы: 7
LaCie 5BIG NAS PRO Quick Install Manual preview
5BIG NAS PRO
Бренд: LaCie Страницы: 22
Oracle B31003-01 User Manual preview
B31003-01
Бренд: Oracle Страницы: 112
Justec JDR454WV4 User Manual preview
JDR454WV4
Бренд: Justec Страницы: 61
CNC-Step AceroDURO 100/S100 Operating Instructions Manual preview
AceroDURO 100/S100
Бренд: CNC-Step Страницы: 86
Allied Telesis CentreCOM AT-3716XL Quick Install Manual preview
CentreCOM AT-3716XL
Бренд: Allied Telesis Страницы: 2
Asante IntraSwitch 5324MT Quick Installation Manual preview
IntraSwitch 5324MT
Бренд: Asante Страницы: 2
Vivotek TB5328 SERIES User Manual preview
TB5328 SERIES
Бренд: Vivotek Страницы: 317
NETGEAR DGND4000 Datasheet preview
DGND4000
Бренд: NETGEAR Страницы: 3
Linksys WRT330N - Wireless-N Gigabit Gaming Router Wireless User Manual preview
WRT330N - Wireless-N Gigabit Gaming Router Wireless
Бренд: Linksys Страницы: 92
SeaLevel 2423 User Manual preview
2423
Бренд: SeaLevel Страницы: 25
Zapp Z030 User Manual preview
Z030
Бренд: Zapp Страницы: 24
Paradyne FrameSaver DSL 9783 CSU/DSU User Manual preview
FrameSaver DSL 9783 CSU/DSU
Бренд: Paradyne Страницы: 233
Tripp Lite N302-05M Specification Sheet preview
N302-05M
Бренд: Tripp Lite Страницы: 2
GE ATS1203 Installation Sheet preview
ATS1203
Бренд: GE Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды