manualshive.com logo in svg

Interlogix GE-DSSG-244, Руководство пользователя

Пользовательский мануал для Interlogix GE-DSSG-244 доступен для скачивания бесплатно на нашем веб-сайте. Этот руководство поможет вам установить и настроить ваш продукт для максимальной производительности. Безопасное и надежное оборудование для вашего дома или бизнеса.

Поделиться
Скачать
background image

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual 

     

 

179 

 

QoS Class is enabled for that port. When unchecked, RADIUS-server assigned 
QoS Class is disabled for all ports. 

•

 

RADIUS-Assigned 
VLAN Enabled 

RADIUS-assigned VLAN provides a means to centrally control the VLAN on 
which a successfully authenticated supplicant is placed on the switch. Incoming 
traffic will be classified to and switched on the RADIUS-assigned VLAN. The 
RADIUS server must be configured to transmit special RADIUS attributes to take 
advantage of this feature (see RADIUS-Assigned VLAN Enabled below for a 
detailed description). 
The "RADIUS-Assigned VLAN Enabled" checkbox provides a quick way to 
globally enable/disable RADIUS-server assigned VLAN functionality. When 
checked, the individual ports' ditto setting determine whether RADIUS-assigned 
VLAN is enabled for that port. When unchecked, RADIUS-server assigned VLAN 
is disabled for all ports. 

•

 

Guest VLAN Enabled 

A Guest VLAN is a special VLAN - typically with limited network access - on 
which 802.1X-unaware clients are placed after a network administrator-defined 
timeout. The switch follows a set of rules for entering and leaving the Guest 
VLAN as listed below. 
The "Guest VLAN Enabled" checkbox provides a quick way to globally 
enable/disable Guest VLAN functionality. When checked, the individual ports' 
ditto setting determines whether the port can be moved into Guest VLAN. When 
unchecked, the ability to move to the Guest VLAN is disabled for all ports. 

•

 

Guest VLAN ID 

This is the value that a port's Port VLAN ID is set to if a port is moved into the 
Guest VLAN. It is only changeable if the Guest VLAN option is globally enabled.
Valid values are in the range [1; 4095]. 

•

 

Max. Reauth. Count 

The number of times that the switch transmits an EAPOL Request Identity frame 
without response before considering entering the Guest VLAN is adjusted with 
this setting. The value can only be changed if the Guest VLAN option is globally 
enabled. 
Valid values are in the range [1; 255]. 

•

 

Allow Guest VLAN if 
EAPOL Seen 

The switch remembers if an EAPOL frame has been received on the port for the 
life-time of the port. Once the switch considers whether to enter the Guest VLAN, 
it will first check if this option is enabled or disabled. If disabled (unchecked; 
default), the switch will only enter the Guest VLAN if an EAPOL frame has not 
been received on the port for the life-time of the port. If enabled (checked), the 
switch will consider entering the Guest VLAN even if an EAPOL frame has been 
received on the port for the life-time of the port. 
The value can only be changed if the Guest VLAN option is globally enabled. 

 

Port Configuration 

The table has one row for each port on the selected switch in the stack and a number of columns, which are: 

Object 

Description 

•

 

Port 

The port number for which the configuration below applies. 

•

 

Admin State 

If NAS is globally enabled, this selection controls the port's authentication mode. 
The following modes are available: 

Force Authorized 

In this mode, the switch will send one EAPOL Success frame when the port link 
comes up, and any client on the port will be allowed network access without 
authentication.  

Force Unauthorized 

In this mode, the switch will send one EAPOL Failure frame when the port link 
comes up, and any client on the port will be disallowed network access.   

Port-based 802.1X 

In the 802.1X-world, the user is called the supplicant, the switch is the 

Содержание GE-DSSG-244





























































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GE-DSSG-244

D-Link ShareCenter Quattro DNS-345 Quick Install Manual preview
ShareCenter Quattro DNS-345
Бренд: D-Link Страницы: 40
D-Link ShareCenter Quattro DNS-345 Datasheet preview
ShareCenter Quattro DNS-345
Бренд: D-Link Страницы: 4
D-Link ShareCenter DNS-343 Quick Install Manual preview
ShareCenter DNS-343
Бренд: D-Link Страницы: 12
D-Link AirPlus G DWL-G710 Troubleshooting preview
AirPlus G DWL-G710
Бренд: D-Link Страницы: 5
D-Link MYDLINK DNR-322L Datasheet preview
MYDLINK DNR-322L
Бренд: D-Link Страницы: 4
D-Link mydlink DNR-312L Quick Install Manual preview
mydlink DNR-312L
Бренд: D-Link Страницы: 8
D-Link AC750 Quick Install Manual preview
AC750
Бренд: D-Link Страницы: 12
D-Link DNS-722-4 Quick Install Manual preview
DNS-722-4
Бренд: D-Link Страницы: 16
D-Link DNS-722-4 User Manual preview
DNS-722-4
Бренд: D-Link Страницы: 88
E-Lins H900 Series Quick Start Manual preview
H900 Series
Бренд: E-Lins Страницы: 9
ZyXEL Communications NBG318S v2 Specifications preview
NBG318S v2
Бренд: ZyXEL Communications Страницы: 2
TP-Link L-R480T+ User Manual preview
L-R480T+
Бренд: TP-Link Страницы: 131
Comet Labs 24-Port 1000BASE-T User Manual preview
24-Port 1000BASE-T
Бренд: Comet Labs Страницы: 44
Goobay 93122 User Manual preview
93122
Бренд: Goobay Страницы: 20
Camozzi UVIX Use And Maintenance Manual preview
UVIX
Бренд: Camozzi Страницы: 22
Parker Sporlan Division SCS-PB Series Installation And Operating Instructions Manual preview
Sporlan Division SCS-PB Series
Бренд: Parker Страницы: 10
Williams Sound DW SY 1 User Manual preview
DW SY 1
Бренд: Williams Sound Страницы: 2
ICP DAS USA ZT-2005-C8 User Manual preview
ZT-2005-C8
Бренд: ICP DAS USA Страницы: 60

Бренды по названию

Популярные бренды

Загрузить еще бренды