17
Mounting guide
Drive
t
Access hole (2)
7. Slide the tray assembly into the chassis and align the mounting holes.
8. Install the screws that secure the tray to the chassis.
9. Connect the SCSI cable and the power cable to the disk drive.
Internal Bay Disk Drives
To replace an internal bay disk drive:
1. Remove the right and left covers. See Chapter 1, “Accessing the System,” for details.
2. Disconnect the SCSI cable and power cable from the disk drive.
3. Remove the two screws that secure the drive bracket assembly to the left side of the
chassis.
4. Grasp the drive bracket assembly and remove the screw that secures the bracket to the
right side of the chassis.
5. Pull the drive bracket assembly out of the chassis.
6. Remove the four screws that secure the old drive to the bracket.
