Optional Interaction Edge configuration
33
Note:
The default HTTPS port number for Interaction Edge is 443.
2.
When prompted, supply the administrator credentials and select the
Log in
button.
The
Status-System
page of the Interaction Edge interface is displayed.
3.
In the upper right corner of the page, select the
Settings
icon.
The
Settings-System
page is displayed.
4.
On the left side of the page, select the
Updates
tab.
The
Settings-Updates
page is displayed.
5.
Ensure that the
Restore Point Layer Usage
data indicates that a layer is available.
Important!
If Interaction Edge is using all restore point layers, you must create a new base restore point,
which is a manual process. The manual creation of a base restore point removes all
previously saved restore points. You cannot delete specific restore points from the
Restore
Point Retrieve
list box.
6.
In the
Restore Point Management
area, enter a brief description in the
User Restore Point Save
box.
Tip:
You do not need to specify a date in the
User Restore Point Save
box. Interaction Edge
adds this information automatically.
7.
Select the
Save
button that is located to the right of the
User Restore Point Save
box.
Interaction Edge creates the restore point.
Retrieve an Interaction Edge restore point
Caution!
Retrieving a restore point removes all subsequent restore points and software changes, such as
updates and patches, which you applied after the creation date of the restore point. In such a
situation, you must reapply updates and patches.
1.
On a computer, open a web browser and navigate to the IP address of the Interaction Edge appliance.
Note:
The default HTTPS port number for Interaction Edge is 443.
2.
When prompted, supply the administrator credentials and select the
Log in
button.
The
Status System
page of the Interaction Edge interface is displayed.
3.
In the upper right corner of the page, select the
Settings
icon.
The
Settings-System
page is displayed.
4.
On the left side of the page, select the
Updates
tab.
The
Settings-Updates
page is displayed.
5.
In the
Restore Point Retrieve
list box of the
Restore Point Management
area, select the restore point
that you want to apply to Interaction Edge.
