68
Intenza 550 Series Stairclimber Handbook: Trouble Shooting: Error Message
7.2 Error Message
When the display shows below message, below corrections for checking the problem and you can also refer to the service manual for
more details.
7.3 How To Use The Safety Stop Pull Cord
When operating on the Stairclimber, please attach the Safety Stop clip to your T—shirt.
When operating on the Stairclimber, please attach the Safety Stop clip to your T—shirt. When the lanyard cord is pulled out from the
Stairclimber, Intenza 550 Series Stairclimber will automatically slow down to stop. A message will be displayed on the
console
—
“
CHECK SAFETY KEY
”. In order to restart the Stairclimber, just re—attach the safety key to the slot.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SOLUTION
If error code is 1, 2, 4, 6, 7, 9, 20, 21, 50, 55, 102, 103, 104 console will display ”Need Maintenance”.
Solution: Execute “Self Diagnosis” function to get error code for troubleshooting.
Cause: Bad connection between console and USB board or USB stick.
· Re-plug in USB
· Check cable connection between USB board and console or change cables if needed
· Change USB board
· Change console main board
· Check safety key is properly inserted
· Check safety key connection (cable and connector)
· Reboot system and check if any error code remains
· Change console main board
Check buzzer sound from LCB—
· If the period of the sound is 3sec, check the cable connection from LCB to Console.
· If the period of the sound is 1sec, change LCB.
550Ce2
·
550Ci
·
·
·
·
·
·
·
·
·
MESSAGE
NEED MAINTENANCE
USB STICK FAIL
CHECK SAFETY KEY (ERR8)
CHECK MEMORY (ERR 60) ;
CHECK CONSOLE PCB (ERR 10) ;
CHECK USB COMM (ERR 81) ;
CHECK LCB or Cable
(No error code and the reason
of this message)
