IntelliQuip TOUGHPOWER TP-1000, Руководство пользователя

Страница: 15 / 35

The internal MPPT Controller and multi-stage charger will receive and regulate the power to charge the
Battery fitted in the ToughPower. Up to 10 Amp charging can be achieved through Solar Charging. The
multi-stage
​ ​
charger
​ ​
will
​ ​
charge
​ ​
and
​ ​
condition
​ ​
the
​ ​
Battery,
​ ​
and
​ ​
will
​ ​
shut-off
​ ​
when
​ ​
charging
​ ​
is
​ ​
complete.
7.4
​ ​​ ​
Dual
​ ​
Battery
​ ​
Bypass
​ ​
Controller:
​ ​​ ​​
TP-1000
​
DUAL
​
​ ​
model
​ ​
only
Direct
​ ​
Alternator
​ ​
Bulk
​ ​
Charge
​ ​
&
​ ​
DC-DC
​ ​
Charging
The advanced technology inside the Lid controls when to bypass the internal DC-DC Charger to allow the
Vehicle's Alternator to provide BULK charging power direct to the ToughPower Battery, and then switch
the
​ ​
internal
​ ​
DC-DC
​ ​
Charger
​ ​
inline
​ ​
to
​ ​
finish
​ ​
charging
​ ​
the
​ ​
battery.
This unique capability in the ToughPower allows the best of both existing dual battery charging
technologies! Direct connection to the vehicle Alternator for BULK charging (no excess heat generated as
with high current DC-DC Charging electronics) and then switch the 10A DC-DC Charger inline to complete
the
​ ​
charging.
Dual
​ ​
Battery
​ ​
Setup
​ ​
Instructions
1. Attach the provided 4-Pin CIG Accessory Cable to a
vehicle ignition controlled CIG Socket and to the
ToughPower.
​
Note: the vehicle
​
CIG Socket MUST be
ignition controlled - ie only has power when the car is
running.
2. Attach an AWG6 cable from your vehicle's main battery
to the ToughPower's LHS Anderson Input Socket. We
recommend you include a
​
100A fuse as close to the
vehicle
​ ​
battery
​ ​
(AWG6
​ ​
cable
​ ​
and
​ ​
fuse
​ ​
not
​ ​
supplied).
3. Make sure the ToughPower is switched
​
ON and the
internal
​ ​
electronics
​ ​
will
​ ​
do
​ ​
the
​ ​
rest!
With both vehicle input charging cables connected to the
ToughPower, the ToughPower will start charging as soon as the vehicle key is turned into the Accessories
position or the engine starts running.
​
Note: If at any time the CIG Accessory Cable gets disconnected or
the
​ ​
vehicle
​ ​
is
​ ​
turned
​ ​
off
​ ​
charging
​ ​
will
​ ​
be
​ ​
disabled.
Note: The charging current through the CIG Accessory Cable is limited to
​
10 Amps
​
. The current will not
exceed
​ ​
10
​ ​
Amps
​ ​
through
​ ​
your
​ ​
vehicle
​ ​
CIG
​ ​
Socket.
While charging through the CIG Accessory Cable the ToughPower will evaluate if BULK Charge (from the
vehicle alternator) is required, during this stage the HOME screen displays the BULK icon next to the
charging
​ ​
source
​ ​
to
​ ​
acknowledge
​ ​
the
​ ​
presence
​ ​
of
​ ​
the
​ ​
Dual
​ ​
Battery
​ ​
setup.
Page
​ ​
15