IntelliQuip TOUGHPOWER TP-1000, Руководство пользователя

Страница: 28 / 35

alternatively, adjust the timer in 15 min increments. If timer is left as OFF the Inverter will run until it is
turned
​ ​
OFF
​ ​
by
​ ​
the
​ ​
user.
When the timer is set, once the configured time expires the inverter will automatically turn OFF. The
progress
​ ​
of
​ ​
the
​ ​
timer
​ ​
can
​ ​
be
​ ​
checked
​ ​
from
​ ​
the
​ ​
INFO
​ ​
screen.
8.9.2
​ ​
Pure
​ ​
Sine
​ ​
Wave
​ ​
Inverter
​ ​
Safety
​ ​
Protections
The Pure Sine Wave Inverter has an in-built safety cut-off function that will automatically disable the
Inverter when a
​
Low Voltage Battery condition exists – this is to protect the battery from damage. The
battery
​ ​
will
​ ​
need
​ ​
to
​ ​
be
​ ​
recharged
​ ​
before
​ ​
you
​ ​
can
​ ​
recommence
​ ​
using
​ ​
240V
​
AC
​
​ ​
power.
The Inverter has an audible alarm that will sound when an
​
Over Temperature condition exists. Power to
the 240V
​
AC
socket will shut off so to prevent damaging the electronic circuits. After a 15-minute
cool-down
​ ​
period
​ ​
the
​ ​
Inverter
​ ​
can
​ ​
then
​ ​
be
​ ​
switched
​ ​
back
​ ​
on.
Note: The Inverter cannot be used whilst the ToughPower is charging from MAINS or an EXTERNAL source.
The
​ ​
following
​ ​
message
​ ​
will
​ ​
appear
​ ​
to
​ ​
indicate
​ ​
this
​ ​
restriction.
8.9.3
​ ​
AC
​ ​
Overload
If the electrical device that you have connected has a higher Power Rating than the built-in Pure Sine Wave
Inverter, then the Inverter will not have enough power to power the device and will turn itself OFF. An
audible alarm will indicate this condition. This includes devices that have a rating above the Continuous
Power
​ ​
Rating
​ ​
of
​ ​
the
​ ​
Inverter,
​ ​
and
​ ​
below
​ ​
the
​ ​
Peak
​ ​
Power
​ ​
Rating
​ ​
of
​ ​
the
​ ​
Inverter.
Example A: An Angle Grinder with 1500W Power Rating, or Pod Coffee Machine with Power Rating 1360W
can be connected to the TP-1000 & TP-1000
​
DUAL
​
. Both devices can be powered for a shortened period as
Page
​ ​
28