NSN 6130-99-391-3441 ()
Battery Charger Analyser : Operator Manual
Verify that the correct battery has been selected.
Press
S E L E C T P R O C E S S R E Q U I R E D F O R T H I S B A T T E R Y
C A P A C I T Y T E S T
Press
S T A R T C A P T E S T
E N D V O L T S 2 0 . 0 V A M P S 1 8 . 0 A T I M E 1 . 0 H
Press
The display will show the basic test parameters, the type of test and the
present valid voltage and current and time elapsed. This display will be shown as follows:
C A P A C I T Y
T E S T
2 0 . 0 0 V
1 8 . 0 0 A
1 . 0 0 H
R U N
0 . 0 %
0 . 0 0 V
0 . 0 0 A
0 . 0 0 H
5.4
Capacity Test Termination
Following the end of test, the will sound the audible alarm until any key on the
key panel is pressed. The display will show the capacity test values until another key is
pressed, at which time if a printer is connected will print the test results. The display will
then resume the normal default mode as follows:
T S 1 3 4 0 + M A I N M E N U
7 - 0 5 - 2 0 0 1 1 6 : 3 0 : 1 5
P E R F O R M
C H A R G E / T E S T U S I N G N S N N U M B E R
Doc: DWG1030-25-R11 Operators manual.odt
Page 12 of 72
Copyright Material of Intelligent Charging Limited © 2015
Printed On : 12/06/17
TYPE OF TEST BEING
PERFORMED
PRESET TRIP
VOLTAGE
PRESET TEST
CURRENT
PRESET TEST
DURATION
ACTIVE RUN
INDICATOR
CAPACITY SO
FAR
BATTERY
VOLTAGE
BATTERY
CURRENT
TIME ELAPSED
