INTELLICYT iQue SCREENER, Руководство по оборудованию

Страница: 23 / 110

17 iQue ® Hardware Manual: Part Number 10554 Rev C., Getting to Know the iQue
Overview
IntelliCyt’s iQue
®
Screener and iQue Screener HD are platforms for screening suspension cells, beads, microbes and
mixtures. These systems consist of a robotic plate rail with an orbital shaker, robotic plate sampler, detector, and
ForeCyt
®
software to design, run, and analyze screening assays.
Requirements
Power
120 VOLT CONFIGURATION
AC Input: 120 VAC, 50-60Hz, less than 3A
Fuses are 5mm x 20 mm Glass-Tube Fuse, Time Delay, 250 VAC, 5 Amp
220 VOLT CONFIGURATION
AC Input: 220 VAC, 50-60HZ, less than 2A
Fuses are 5mm x 20 mm Glass-Tube Fuse, Time Delay, 250 VAC, 5 Amp
The instrument must be plugged into an IntelliCyt approved uninterruptable power
supply (UPS). The UPS must be plugged into a standard, grounded, or earthed
mains electrical outlet, conforming to local codes. Non-grounded or non-earthed
mains outlet adaptors must not be used. The iQue Screener is provided with an
approved UPS.
Power Cable Between
UPS and Electrical
Outlet
Minimum ratings: 6A , 250 V, 70°C, PVC H03VVF or equivalent, 3 x 0.75 mm2
cable,
Female Connector Type: IEC 60320 C13,
Male Plug: European Type CEE 7/7, or Certified equivalent Plug for other countries.
Environment
20-30°C, less than 80% relative humidity (Non-Condensing)
Altitude up to 2000 meters
Transient overvoltage Category II
Condensation Pollution Degree 2
Instrument Size
Height x Width x Depth
(does not include
computer and UPS)
65.5 x 98.6 x 62.5 cm (25.8 x 38.8 x 24.6 inch)
96.5 x 109.2 x 96.5 cm (38 x 43 x 38 inch) with all doors open.
Dry Weight 82 kg (180lb)
Getting to
Know the iQue