Intel Xeon Phi Processor x200 Скачать руководство пользователя | Manualshive

Страница: 31 / 114

background image

Order Number: 334785-002

Intel

®

Xeon

®

Phi™ Processor x200 Product Family TMSDG

31



Socket Mechanical Design

3.6

Orientation in Packaging, Shipping, and Handling

Packaging media supports high-volume manufacturing. Media design will be such that
no component of the socket (solder balls, contacts, housing, and so on) is damaged
during shipping and handling. Each part number will be shipped from suppliers in
separate Joint Electron Device Engineering Council (JEDEC) trays; for example, all left
halves of the socket in one tray and all right halves in another. Tray height could be
taller than standard.

3.7

Pick-and-Place and Dust Cover

The pick-and-place cover retention will be sufficient to support the socket weight during
lifting, translation, and placement. The pick-and-place cover removal force should not
exceed 1.7 lbf in the horizontal direction, during manual operation. The pick-and-place
cover ergonomics requirements are listed in

.

The pick-and-place cover will have openings so that the Pin A1 and keying inserts are
visible. To facilitate high-volume manufacturing, the socket should have a detachable
cover to support the vacuum type pick-and-place system. The cover will remain on the
socket during reflow to help prevent contamination. The cover can withstand 260 °C for
40 seconds (typical reflow/rework profile) without degrading.

The cover design should allow use of a tool to remove the cover. The force required for
removing of the cover should comply with the applicable requirements of

SEMI S8-

0999 Safety Guidelines for Ergonomics/Human Factors Engineering of Semiconductor
Manufacturing Equipment

. The removal of the cover should not cause any damage to

the socket body nor to the cover itself.

A separate socket dust cover, a single part covering both halves of the socket, is
provided for use after socket and main board integration for use as a protective device
to prevent damage to the contact field during handling. See

and

3.7.1

Socket and Pick-and-Place Cover Durability

The socket will withstand 30 cycles of processor insertion and removal. The maximum
part average and single pin resistances must be met when mated in the 1st through
30th cycles.

The socket pick-and-place cover will withstand 15 cycles of insertion and removal.

3.8

Keep-In/Keep-Out Zone

Socket keep-in and keep-out zones are identified on the main board to ensure that
sufficient space is available for socket placement and to prevent interference between
the socket and other components on the main board. These areas are illustrated in

. It is the responsibility of the socket supplier to identify any required

deviation from design guidance identified here.

«
...
29
30
31
32
33
...
»

Содержание Xeon Phi Processor x200



















































































































Отзывы:

Нет отзывов

Похожие инструкции для Xeon Phi Processor x200

Бренд: Campbell Страницы: 42

Бренд: ICP DAS USA Страницы: 48

Бренд: ICP DAS USA Страницы: 24

Бренд: VMIC Страницы: 126

PG-FlexPlus AMU-912

Бренд: ADC Страницы: 130

Бренд: Fieldbus Specialists Страницы: 39

Бренд: FS Страницы: 19

Бренд: Roland Страницы: 2

Бренд: Realtek Страницы: 30

IntroSpect Analyzer 2 Series

Бренд: Aruba Страницы: 5

RCO-3000 Series

Бренд: C&T Solution Страницы: 96

Бренд: Moxa Technologies Страницы: 51

Бренд: Cameo Страницы: 23

Бренд: ADTRAN Страницы: 20

Бренд: Dataprobe Страницы: 16

GEFORCE RTX 4090

Бренд: Nvidia Страницы: 160

Masterliquid ML240L RGB

Бренд: Cooler Master Страницы: 18

Бренд: Smacq Technologies Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды