Intel Xeon LV страница 54 Скачать руководство пользователя

Страница: 54 / 57

Overview of BIOS Features

Dual-Core Intel® Xeon® Processor LV and Intel

3100 Chipset

User’s Manual

January 2007

Order Number:315879-002

In order to boot from the LAN, enter the BIOS and select LAN boot as your first boot

device. Refer to

Section 4.6.5, “Changing the Boot Device” on page 54

for how to

change this setting.

4.6.3

USB Boot

• In order to boot from a USB device, Enter BIOS and select USB boot as your first

boot device.

Note:

Have USB device plugged in when changing this BIOS setting

4.6.4

Booting without Attached Devices

For use in embedded applications, the BIOS has been designed so that after passing

the POST, the operating system loader is invoked even if the following devices are not

present:

• Video adapter
• Keyboard
• Mouse

4.6.5

Changing the Boot Device

Pressing the <Delete> key during POST causes the BIOS menu to be displayed. Using

your arrow keys move over to <BOOT> and then arrow down to <Boot Device Priority>

and then select which device you would like to boot first and second.

Note:

Please follow the instructions on the right side of the BIOS screen to navigate and

change BIOS settings.

4.7

BIOS Security Features

The BIOS includes security features that restrict access to the BIOS Setup program and

who can boot the computer. A supervisor password and a user password can be set for

the BIOS Setup program and for booting the computer, with the following restrictions:

• The supervisor password gives unrestricted access to view and change all the

Setup options in the BIOS Setup program. This is the supervisor mode.

• The user password gives restricted access to view and change Setup options in the

BIOS Setup program. This is the user mode.

• If only the supervisor password is set, pressing the <Enter> key at the password

prompt of the BIOS Setup program allows the user restricted access to Setup.

• If both the supervisor and user passwords are set, users can enter either the

supervisor password or the user password to access Setup. Users have access to

Setup respective to which password is entered.

• Setting the user password restricts who can boot the computer. The password

prompt is displayed before the computer is booted. If only the supervisor password

is set, the computer boots without asking for a password. If both passwords are

set, the user can enter either password to boot the computer.

• For enhanced security, use different passwords for the supervisor and user

passwords.

• Valid password characters are A-Z, a-z, and 0-9. Passwords may be up to 16

characters in length.

Содержание Xeon LV


























































Результаты поиска

Содержание Xeon LV

Отзывы:

Похожие инструкции для Xeon LV

Бренды по названию

Популярные бренды

Intel Xeon LV, Руководство пользователя

Результаты поиска

Содержание Xeon LV

Отзывы:

Похожие инструкции для Xeon LV

Бренды по названию

Популярные бренды