Intel Xeon LV страница 49 Скачать руководство пользователя

Страница: 49 / 57

Dual-Core Intel® Xeon® Processor LV and Intel

3100 Chipset

January 2007

User’s Manual

Order Number: 315879-002

Technical Reference

3.9.2

Add-in Board Considerations

The CRB is designed to provide 2 A (average) of +5 V current for each add-in board.

There is a total of three x4 PCI Express* slots and one PCI 32/33 add-in board.

3.9.3

Fan Connector Current Capability

Warning:

The processor fan must be connected to the processor fan connector, not to a chassis

fan connector. Connecting the processor fan to a chassis fan connector may result in

on-board component damage that will halt fan operation.

3.9.4

Power Supply Considerations

Warning:

The +5 V standby line for the power supply must be capable of providing adequate

+5 V standby current. Failure to do so can damage the power supply. The total amount

of standby current required depends on the wake devices supported and manufacturing

options.

The power supply must comply with the following recommendations found in the

indicated sections of the ATX form factor specification.

• The voltage relationship between 3.3 VDC and +5 VDC power rails
• The current capability of the +5 VSB line
• All timing parameters
• All voltage tolerances

3.10

Thermal Considerations

This CRB features a thermal protection circuit in the processor voltage regulator area.

This circuit protects the processor voltage regulator from overheating and damaging

the CRB. Please consult the specific processor datasheet for details about the thermal

runoff features supported by the processors paired with the Intel

3100 Chipset. The

triggering temperature level causes the processor to enter a throttling mode (slowing

down the processor if it exceeds its maximum operating temperature) and allow the

processor voltage regulator to cool down.

Table 18.

DC Loading Characteristics Mode

DC Power

DC Current at:

+3.3 V

+5 V

+12 V

-12 V

+5 VSB

Minimum Loading

300 W

5 A

11 A

19 A

0 A

0.34 A (S0)

1.25 A (S3)

Maximum Loading

500 W

25 A

27 A

36 A

0.40 A

0.34 A (S0)

1.25 A (S3)

Table 19.

Fan Connector Current Capability

Fan Connector

Maximum Available Current

CPU Fan

3.0 A

Fan 1

3.0 A

Aux Fan 0

3.0 A

Aux Fan 1

3.0 A

Содержание Xeon LV


























































Результаты поиска

Содержание Xeon LV

Отзывы:

Похожие инструкции для Xeon LV

Бренды по названию

Популярные бренды

Intel Xeon LV, Руководство пользователя

Результаты поиска

Содержание Xeon LV

Отзывы:

Похожие инструкции для Xeon LV

Бренды по названию

Популярные бренды