Intel SR2612UR - Server System - 0 MB RAM, Руководство по обслуживанию

Страница: 44 / 162

30 Intel
®
Server System SR2612UR Service Guide
Installing Your Intel
®
Server System SR2612UR into a
Rack (Optional)
If you are not installing your appliance into a rack, skip the remainder of this section and
go to
“Installing the Disk Drives” on page 33 .
To install your appliance into a rack:
1. Ensure you have these rail kit components:
— One right rail assembly
— One left rail assembly
— Ten 10-32 cage nuts (square hole cabinets)
— Ten 10-32 speed nuts (round hole cabinets)
— Ten 10-32 x 0.50 Phillips pan head screws
2. Ensure the four screws contained within the slider mechanism are loosened.
Figure 20. Slider Mechanism
3. Slide the front and rear portions of the rail away from each other until the length is
correct for your cabinet. Secure the front and rear portions of the rail kit to the front
and rear supports as shown in the following figure. Ensure all connections are
tightened and secure.