Intel SR2600UR - Server System - 0 MB RAM, Руководство по обслуживанию

Страница: 80 / 234

60 Intel
®
Server System SR2600UR/SR2625UR Service Guide
1. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 50 .
2. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct” on page 56
3. Remove the heatsink, if installed. For instructions, see “Removing the Heatsink” on
page 64 .
4. Locate the processor socket.
5. Push the lever handle down and away from the socket to release it (see letter “A” in
Figure 41 ).
6. Rotate the lever open all the way (see letter “B” in Figure 41 ).
Figure 41. Lifting the Processor Socket Handle
7. Push the rear tab with your finger tip to bring the front end of the load plate open
slightly (see letter “A” in Figure 42 ).
8. Open the load plate (see letter “B” in Figure 42 ).
Figure 42. Opening the Load Plate
9. Remove the protective socket cover (see Figure 43 ).
Note: Do not touch the orientation posts on the socket; they are very sensitive and easily
damaged.
Note: Retain the protective socket cover for use when removing a processor that will not be
replaced.
AF002835
A
B
AF002836
B
A