Intel SR2600UR - Server System - 0 MB RAM, Руководство по обслуживанию

Страница: 115 / 234

Intel
®
Server System SR2600UR/SR2625UR Service Guide 95
•
If you do not have a hard drive installed in the other drive bays, install the drive
blank into the hard drive carrier.
•
Install empty hard drive carriers into any remaining empty hard drive bays.
Figure 86. Installing the Filler Panels
Filling Empty Server System Bays (Intel
®
Server
System SR2625UR only)
In the Intel
®
Server System SR2625UR, you must install either a filler panel, drive blank,
or empty drive carrier into an empty drive bay. To access the drive bays, remove the front
bezel if it is installed. For instructions, see “Removing the Front Bezel” on page 46 .
With the bezel removed, install the appropriate filler panel(s), drive blank, or empty hard
drive bay(s) as follows:
•
If you do not have an optical drive installed in the slimline bay, install the slimline
filler panel (see letter “A” in Figure 87 ).
•
If you do not have either a tape drive or 2.5 inch fixed hard drives installed in the
flex bay, install the default filler panel into the flex bay (see letter “B” in Figure 87 ).
•
If you do not have a hard drive installed in the other drive bays, install the drive
blank into the hard drive carrier.
•
Install empty hard drive carriers into any remaining empty hard drive bays.
A
B
AF003030
C