Intel SR2600UR - Server System - 0 MB RAM, Руководство по обслуживанию

Страница: 121 / 234

Intel
®
Server System SR2600UR/SR2625UR Service Guide 101
Removing the Intel
®
RMM3
To remove the Intel
®
Remote Management Module 3, follow these steps:
1. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 50 .
2. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct” on page 56 .
3. Remove screws from the back of the chassis (see letter “A” in Figure 94 ).
4. Disconnect the Intel
®
RMM3 from the connector on the server board (see letter “B”
in Figure 94 ) and remove the module out of the server system (see letter “C” in
Figure 94 ).
Figure 94. Removing Intel
®
RMM3 from the Server System
B
A
RMM3
Connector
RMM3 Module
AF003010
C