Connector/Header Locations and Pin-outs
Intel® Server Board S5500HV/Intel® Server System SR1670HV TPS
Revision 1.2
Intel Confidential
36
Intel order number E69391-006
5.
Connector/Header Locations and Pin-outs
The following section provides detailed information regarding all connectors and headers on the
server board.
5.1
Power Connectors
The server board provides dual 20-pin ATX Main Power connectors. Both connectors have
identical pin-outs and are not used concurrently.
Figure 19. 20-pin ATX Main Power Connector Pin-out and Location
The server board provides a 4-pin peripheral power connector. This connector can supply
power as needed to add-in peripheral devices such as hard drives or optical drives. This
connector has the following pin-out and board location:
Figure 20. 4-pin Peripheral Power Connector Pin-out and Location
5.2
Serial ATA Connectors
The server board provides four red Serial ATA (SATA) connectors numbered SATA-1 thru
SATA-4. The pin-out and location of each is shown below.
+ 12 V
GND
GND
+ 5 V
