Intel SR1530 - AHJPCIERISER PCI-E x8 Riser Card, Руководство пользователя

Страница: 80 / 184

58 Intel
®
Server System SR1530AH / SR1530AHLX / SR1530HAHLX
8. Install the screws to lock the drive in place (see letters “B” and “C” in the figure
below).
Figure 54. Installing the Optical Drive into the System
9. Optional: Install the front bezel. For instructions, see “Installing the Front Bezel”
on page 27 .
10. Install the server system cover. For instructions, see “Installing the Server System
Cover” .
Removing a Slimline Optical Drive (SR1530HAHLX)
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see “Removing the Server
System Cover” on page 28 .
4. Remove the bezel if it is installed. For instructions, see “Removing the Front
Bezel” on page 26 .
5. Remove the screws holding the drive in place (see letters “A” and “B” in the figure
below) and slide the optical drive assembly out through the front of the chassis (see
letter “C” in the figure below).
A
B
AF0016 3 6
C