Intel SR1530 - AHJPCIERISER PCI-E x8 Riser Card, Руководство пользователя

Страница: 47 / 184

3
Hardware Installations and
Upgrades
Caution: No components in the Intel
®
Server System SR1530AH / SR1530AHLX are hot swappable.
Before removing or installing any component in this server system, you must first take the
server out of service, turn off all peripheral devices connected to the system, turn off the
system by pressing the power button, and unplug the AC power cord from the system or
wall outlet.
Note: Some components in the Intel
®
Server System SR1530HAHLX are hot swappable and will
be noted as such in the instructions that follow where applicable.
Note: Most of the illustrations in this chapter show the Intel
®
Server System SR1530AH /
SR1530AHLX with an optional optical drive installed. The instructions for removing and
installing components are the same for the Intel
®
Server System SR1530HAHLX, unless
otherwise noted. When instructions differ, separate illustrations will be shown for the
Intel
®
Server System SR1530HAHLX.
Before You Begin
Before working with your server product, pay close attention to the “Safety Information”
on page iii .
Tools and Supplies Needed
•
Phillips* (cross head) screwdriver, #1 bit and #2 bit
•
Antistatic wrist strap and conductive foam pad (recommended)
System References
All references to left, right, front, top, and bottom assume the reader is facing the front of
the server system as it would be positioned for normal operation.