Intel SR1530 - AHJPCIERISER PCI-E x8 Riser Card, Руководство пользователя

Страница: 116 / 184

94 Intel
®
Server System SR1530AH / SR1530AHLX / SR1530HAHLX
Removing the Rack Handles
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the front bezel if it is installed. For instructions, see “Removing the Front
Bezel” on page 26 .
4. Remove the two screws holding the rack handle in place, and remove the rack
handle from the server system as shown in the figure below.
Figure 87. Removing the Rack Handle
5. Repeat step 4 on the opposite side of the system.
6. Optional: Install the front bezel, if desired. For instructions, see “Installing the
Front Bezel” on page 27 .
7. Plug all peripheral devices and the AC power cable into the server.
AF001204