manualshive.com logo in svg

Intel SR1530 - AHJPCIERISER PCI-E x8 Riser Card, Руководство пользователя

Поделиться
Скачать
Intel SR1530 - AHJPCIERISER PCI-E x8 Riser Card Скачать руководство пользователя страница 176

154

Intel

® 

Server System SR1530AH / SR1530AHLX / SR1530HAHLX

•

Add-in boards:

 must have a printed wiring board flammability rating of minimum 

UL94V-1. Add-in boards containing external power connectors and/or lithium 
batteries must be UL recognized or UL listed. Any add-in board containing modem 
telecommunication circuitry must be UL listed. In addition, the modem must have 
the appropriate telecommunications, safety, and EMC approvals for the region in 
which it is sold.

•

Peripheral Storage Devices:

 must be a UL recognized or UL listed accessory and 

TUV or VDE licensed. Maximum power rating of any one device is 19 watts. Total 
server configuration is not to exceed the maximum loading conditions of the power 
supply.

Restriction of Hazardous Substances (RoHS) 
Compliance

Intel has a system in place to restrict the use of banned substances in accordance with the 
European Directive 2002/95/EC. Compliance is based on declaration that materials 
banned in the RoHS Directive are either (1) below all applicable substance threshold 
limits or (2) an approved/pending RoHS exemption applies.

Note: RoHS implementation details are not fully defined and may change.

Threshold limits and banned substances are noted below.

•

Quantity limit of 0.1% by mass (1000 PPM) for:

—

Lead

—

Mercury

—

Hexavalent Chromium

—

Polybrominated Biphenyls Diphenyl Ethers (PBDE)

•

Quantity limit of 0.01% by mass (100 PPM) for:

—

Cadmium

End-of-Life / Product Recycling

Product recycling and end-of-life take-back systems and requirements vary by country. 
Contact the retailer or distributor of this product for information about product recycling 
and / or take-back.

Содержание SR1530 - AHJPCIERISER PCI-E x8 Riser Card

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды