manualshive.com logo in svg

Intel SR1530 - AHJPCIERISER PCI-E x8 Riser Card, Руководство пользователя

Поделиться
Скачать
Intel SR1530 - AHJPCIERISER PCI-E x8 Riser Card Скачать руководство пользователя страница 133

Intel

® 

Server System SR1530AH / SR1530AHLX / SR1530HAHLX

111

Appendix C: Installation/Assembly 

Safety Instructions

English

The power supply in this product contains no user-serviceable 
parts. Refer servicing only to qualified personnel.

Do not attempt to modify or use the supplied AC power cord if it is 
not the exact type required. A product with more than one power 
supply will have a separate AC power cord for each supply.

The power button on the system does not turn off system AC 
power. To remove AC power from the system, you must unplug 
each AC power cord from the wall outlet or power supply.

The power cord(s) is considered the disconnect device to the main 
(AC) power. The socket outlet that the system plugs into shall be 
installed near the equipment and shall be easily accessible.

SAFETY STEPS:

 Whenever you remove the chassis covers to 

access the inside of the system, follow these steps:

1. Turn off all peripheral devices connected to the system.

2. Turn off the system by pressing the power button.

3. Unplug all AC power cords from the system or from wall 

outlets.

4. Label and disconnect all cables connected to I/O connectors 

or ports on the back of the system.

5. Provide some electrostatic discharge (ESD) protection by 

wearing an antistatic wrist strap attached to chassis ground 
of the system-any unpainted metal surface-when handling 
components.

6. Do not operate the system with the chassis covers removed.

 

 

 

 

Содержание SR1530 - AHJPCIERISER PCI-E x8 Riser Card

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды