Intel R1304BTLSFAN, Руководство по обслуживанию

Страница: 47 / 112

Intel
®
Server System R1304BTSSFAN/R1304BTLSFAN/R1304BTLSHBN Service Guide 27
3
Hardware Installations and
Upgrades
Caution: No components in the Intel
®
Server System R1304BTSSFAN/R1304BTLSFAN are hot-
swappable. Before removing or installing any component in this server system, you must
first take the server out of service, turn off all peripheral devices connected to the system,
turn off the system by pressing the power button, and unplug the AC power cord from the
system or wall outlet.
Note: Some components in the Intel
®
Server System R1304BTLSHBN are hot-swappable and
are noted as such (where applicable) in the following instructions.
Note: Most of the illustrations in this chapter show the Intel
®
Server System R1304BTLSFAN
with an optional optical drive installed. Unless otherwise noted, the instructions for
removing and installing components are the same for the Intel
®
Server System
R1304BTSSFAN/R1304BTLSHBN. When instructions differ, separate illustrations are
shown for the Intel
®
Server System R1304BTSSFAN or R1304BTLSHBN.
Before You Begin
Before working with your server product, pay close attention to the “Safety Information”
on page iii .
Tools and Supplies Needed
•
Phillips* (cross head) screwdriver, #1 bit and #2 bit
•
Antistatic wrist strap and conductive foam pad (recommended)
System References
All references to the left, right, front, top, and bottom assume the reader is facing the front
of the server system as it would be positioned for normal operation.