Intel R1304BTLSFAN, Руководство по обслуживанию

Страница: 43 / 112

Intel
®
Server System R1304BTSSFAN/R1304BTLSFAN/R1304BTLSHBN Service Guide 23
3. Insert the bootable BIOS Recovery media containing the new BIOS image files.
A BIOS recovery can be accomplished from SATA CD and USB Mass Storage
device. Please note this platform does not support recovery from a USB floppy.
The recovery media must contain the following files under the root directory:
✧
FVMAIN.FV
✧
UEFI iFlash32
✧
*Rec.CAP
✧
Startup.nsh (update accordingly to use proper *Rec.CAP file)
4. Plug the system into the AC power source and power it on.
5. The BIOS POST screen will appear displaying the progress, and the system will
automatically boot to the EFI SHELL.
6. Remove the recovery media.
7. Power down and unplug the system from the AC power source.
8. Move the BIOS recovery jumper back to the original position, covering pins
1 and 2.
9. Plug the system into the AC power source and power it up to confirm the recovery
was successful.
10. Do NOT interrupt the BIOS POST during the first boot.
Clearing the Password
11. If the user or administrator password(s) is lost or forgotten, moving the password
clear jumper into the “clear” position clears both passwords. Before a new
password(s) is set, you must restore the password clear jumper to its original
position. For location of the jumper, see “Configuration Jumpers” on page 14 .
1. Power down the system and disconnect the AC power.
2. Open the server chassis.
3. Move the jumper from the normal operation position, Password Clear Protect, at
pins 1 and 2 to the Password Clear Erase position, covering pins 2 and 3.
4. Reconnect the AC power, power up the system.
5. Power down the system and disconnect the AC power.
6. Return the Password Clear jumper to the Password Clear Protect position, covering
pins 1 and 2.
7. Reconnect the AC power and power up the server.
8. Close the server chassis. The password is cleared and can be reset by going into the
BIOS setup.