Intel Express 510T, Руководство пользователя

Страница: 63 / 126

681872.bok : 68187203 53 Mon Apr 20 15:35:05 1998
Changing the Setup of the Port
Standard Configuration
53
3 Click
Spanning Tree
.
4
Click
Enable spanning tree on this port
.
If there is a check mark in the box, the port is used in STP. If
the box is empty, the port is not used in STP.
5 Click
OK
.
Changing the cost of the
path
The higher the cost, the lower the chance of this port being used in
STP. When possible, give a port a low cost if it is connected to a faster
network segment. To change the overall cost of the path between a
port and the root port:
1 Click the port you want to change.
2
Select
Configuration>Port Setup
.
3
Click
Spanning Tree
.
4 Click
Path cost
.
5
Type the required value.
6
Click
OK
.
Changing priority of the
port in the spanning tree
The higher the value, the lower the chance of this port being used as
the designated or root port. To change the priority value:
1
Click the port you want to change.
2
Select
Configuration>Port Setup
.
3 Click
Spanning Tree
.
4
Click
Priority
.