Intel Express 510T, Руководство пользователя

Страница: 18 / 126

681872.bok : 68187201 8 Mon Apr 20 15:35:05 1998
Express 510T Switch
Installation
8
1
Mounting kit
The switch is delivered with a kit to attach it to a standard 19-inch
equipment rack (with side support rails). The kit contains two mount-
ing brackets and four screws (for attaching the brackets to the sides
of the switch).
Warning
The switch must only be installed in an equipment rack
which has side support rails. The mounting brackets are
used only to secure the switch in the rack and must not
support its weight.
Tools required for
positioning in a rack
You need the following items for mounting the switch in a rack:
■
Standard 19-inch rack with side support rails
■
A rack mounting kit (included)
■
3 mm screwdriver
■
Customer-supplied screws for securing the switch in the rack
Mounting screws are not provided because the required sizes
may vary from rack to rack.
In an equipment rack
To mount the switch in a standard equipment rack, proceed as fol-
lows:
1 Attach the mounting bracket marked “Left” to the left-hand side
of the switch, and attach the mounting bracket marked “Right”
to the right-hand side of the switch, using the four screws pro-
vided.
It is important to attach the mounting brackets to the correct
sides. Otherwise the switch will not be correctly aligned in the
equipment rack.
2
If the four rubber feet prevent the switch from standing firmly
on the equipment rack’s side support rails, remove the feet.
970707 Awaiting drawing from EBZ
1590
Power
Intel Express
510T Switch
Status
Temperature
RPS
1
2 3 8 7 6 5 4 9
10 11 16 15 14 13 12
17 18 19 24 23 22 21 20
Reset
Console
9600-8-N-1
Slot B
Slot A
Blink Activity Collision
Solid Link Disable
LEDs Green Orange
Port Status
Solid 100 Mbps Full duplex
Off 10 Mbps Half duplex
LEDs Green Orange