Intel Express 510T, Руководство пользователя

Страница: 24 / 126

681872.bok : 68187201 14 Mon Apr 20 15:35:05 1998
Express 510T Switch
Installation
14
1
Look at the other front panel LEDs during start-up and check that
they are operating correctly.
Port LED states
The LEDs reflect the state of each port:
Default settings after start-
up
Once the switch has started successfully, installation is complete and
the switch is using its default setting (also known as default configu-
ration):
■
All ports are enabled.
■
All ports operate in auto-negotiation mode.
■
Spanning Tree is disabled on all ports.
■
Addresses which have been silent for more than 15 minutes are
purged from the switch’s address table (the MAC Address Age-
ing time).
■
No access restrictions to Local Management.
■
No SNMP restrictions.
■
No permanent MAC address entries defined. A permanent entry
is a MAC address which is defined as being permitted only on a
certain port, and can be a useful security feature.
Green Orange Shows
Off Off Port enabled, no link.
Blinking
randomly Off Port enabled, Rx/Tx traffic, link pulse
active.
Solid Off Port enabled, link pulse active.
Solid Blinking
randomly Collision detected.
Port enabled, link pulse active.
Off Solid Port disabled by management.
Solid Solid Port disabled by a hardware fault, or no
hardware connected.
Off One blink/
second Port has wrong link partner.