Intel 8XC251SA, Руководство пользователя

Страница: 21 / 458

1-1
CHAPTER 1
GUIDE TO THIS MANUAL
This manual describes the 8XC251SA, SB, SP, SQ† embedded microcontroller, which is the first
member of the Intel MCS
®
251 microcontroller family. This manual is intended for use by both
software and hardware designers familiar with the principles of microcontrollers.
1.1 MANUAL CONTENTS
This manual contains 14 chapters and 3 appendices. This chapter, Chapter 1, provides an over-
view of the manual. This section summarizes the contents of the remaining chapters and appen-
dices. The remainder of this chapter describes notational conventions and terminology used
throughout the manual and provides references to related documentation.
Chapter 2, “Architectural Overview” — provides an overview of device hardware. It covers
core functions (pipelined CPU, clock and reset unit, and on-chip memory) and on-chip peripher-
als (timer/counters, watchdog timer, programmable counter array, and serial I/O port.)
Chapter 3, “Address Spaces” — describes the three address spaces of the MCS 251 microcon-
troller: memory address space, special function register (SFR) space, and the register file. It also
provides a map of the SFR space showing the location of the SFRs and their reset values and ex-
plains the mapping of the address spaces of the MCS
®
51 architecture into the address spaces of
the MCS 251 architecture.
Chapter 4, “Device Configuration” — describes microcontroller features that are configured at
device reset, including the external memory interface (the number of external address bits, the
number of wait states, memory regions for asserting RD#, WR#, and PSEN#, page mode), binary/
source opcodes, interrupt mode, and the mapping of a portion of on-chip code memory to data
memory. It describes the configuration bytes and how to program them for the desired configu-
ration. It also describes how internal memory space maps into external memory.
Chapter 5, “Programming” — provides an overview of the instruction set. It describes each in-
struction type (control, arithmetic, logical, etc.) and lists the instructions in tabular form. This
chapter also discusses the addressing modes, bit instructions, and the program status words.
Appendix A provides a detailed description of each instruction.
Chapter 6, “Interrupt System” — describes the 8XC251Sx interrupt circuitry which provides
a TRAP instruction interrupt and seven maskable interrupts: two external interrupts, three timer
interrupts, a PCA interrupt, and a serial port interrupt. This chapter also discusses the interrupt
priority scheme, interrupt enable, interrupt processing, and interrupt response time.
† The 8XC251SA, SB, SP, SQ products are also collectively referred to as 8XC251S x .