iNTEGRAL DX Spray Paver, Руководство оператора

Страница: 29 / 58

48 | P a g e
Display screen unit
Using the 7‐inch (178 mm) display screen unit (Figure 26), the operator
selects variables and controls the functions of the spray paver.
The display screen unit is located near the operator control console, but
its location varies with the configuration.
Figure 26: Display screen unit
The following are some of the tasks an operator performs through the
display screen unit (see page 58 for specific operation):

Operate pump functions

Extend & retract the left and right telescoping spray bars, tilt the
front spray bar housing, lock the front spray bar housing (some
models only)

View and adjust spray width through nozzle selection

See if the master spray switch (on the pendant control) is on or off

Display machine totals and job totals, and reset job totals.

View alarms that alert operators of dangers or system issues

Display optional video camera(s) output (up to two video cameras
may be installed)

View speeds of small and large pumps