35
|
P a g e
Figure 16:
Spray wand connection and hose
Emulsion lines
Emulsion lines connect the emulsion tank(s) to the pumping station and
the pumping the station to the spray bars.
Warning:
Only use factory‐supplied emulsion lines,
emulsion line connections and hose clamps. Other hoses may
rupture due to heat and cause serious injury. In most cases, a
specific type of hose barb fitting is used to prevent the hose from
disconnecting from the fitting. Do not use a standard worm‐gear
hose clamp, which will not meet requirements.
Содержание Spray Paver
Страница 10: ...15 P a g e Figure 1 Safety decal location may vary depending upon model x2 x2 X2...
Страница 22: ...41 P a g e Figure 21 Solenoid valve manifold in its enclosure...
Страница 58: ...Integral dx 121 N 1st Street Montevideo MN 56265 USA T 320 269 3227 www integraldx com sales integraldx com...
