44 |
P a g e
Heating system enclosure
A heating system enclosure (Figure 23
)
is mounted on each tank. Inside is
the thermostat for regulating the tank heating temperature as required
by the emulsion type.
Warning:
Never let the emulation get above 200
F.
Boiling will occur if the temperature is too high and potentially
cause burn injuries. Also, the water base will evaporate, changing
the properties of the emulsion.
On some models, LEDs on the enclosure light when the heat elements are
on (see Figure 23).
Figure 23:
Heating system enclosure and LED designation
Plugged to 240 V
power
Plugged to 120 V
power
System is
demanding heat
Содержание Spray Paver
Страница 10: ...15 P a g e Figure 1 Safety decal location may vary depending upon model x2 x2 X2...
Страница 22: ...41 P a g e Figure 21 Solenoid valve manifold in its enclosure...
Страница 58: ...Integral dx 121 N 1st Street Montevideo MN 56265 USA T 320 269 3227 www integraldx com sales integraldx com...
