61
|
P a g e
Selecting operation of spray nozzle (or group of nozzles)
1.
Use the multi‐navigation key [5R] to move through the range of
nozzle valve switches. The current selection is highlighted with a
dark blue box.
Note:
With the telescoping spray bars, you can select a
complete spray bar by selecting [L outer and L gang] or [R outer
and R gang], or you can select an individual switch
.
2.
Press the center of the multi‐navigation key to select or deselect
an individual switch or an entire spray bar. A switch is blackened
when it is deselected.
Tip:
To select combinations of spray bar sections, push the
up arrow on the multi‐navigation key. The selections are
highlighted with a dark blue box.
Note:
Master (the master spray switch) status on/off is also
indicted and will apply to all the selected switches. However the
only way to turn the master spray switch on/off is with the
pendant control
.
Figure 33 shows some switches selected, all of which are turned
on because 1) the master spray switch is on, and 2) the pump in
Spray Auto is on (see the Pump Function section below).
Figure 34 shows all switches selected, but the master switch is off.
Содержание Spray Paver
Страница 10: ...15 P a g e Figure 1 Safety decal location may vary depending upon model x2 x2 X2...
Страница 22: ...41 P a g e Figure 21 Solenoid valve manifold in its enclosure...
Страница 58: ...Integral dx 121 N 1st Street Montevideo MN 56265 USA T 320 269 3227 www integraldx com sales integraldx com...
