Integra DTR-50.4, Инструкция по эксплуатации

Страница: 57 / 112

Advanced Operations
En-57
■
BD/DVD , CBL/SAT , STB/DVR, GAME1, GAME2 ,
PC , AUX , TV/CD , PHONO
`
IN1 , IN2 :
Select the input to which the component has been
connected.
`
- - - - - :
Output composite video sources from the HDMI
output. The upconverted output from HDMI depends
on the assignment of “
Composite Video Input ”.
Note
• For composite video upconversion for the COMPONENT
VIDEO MONITOR OUT , the “ Monitor Out ” setting must be
set to “ Analog ” (
➔
page 55
), and the “ Component Video
Input ” setting must be set to “ - - - - - ”. See “Connection Tips and
Video Signal Path” for more information on video signal flow
and upconversion (
➔
page 100 ).
Composite Video Input
If you connect a component to a composite video input,
you must assign that input to an input selector.
If you switch the input to “
TV/CD ” with its default
assignment, the audio of “ TV/CD ” is output while the
video of the previously-selected source is displayed.
Here are the default assignments.
■
BD/DVD , CBL/SAT , STB/DVR, GAME1 , GAME2 ,
TV/CD , PHONO
`
IN1 , IN2 , IN3 , IN4 :
Select the input to which the component has been
connected.
`
- - - - - :
The composite video is not input.
Note
• “ AUX ” is used only for input from the front panel.
• “ PC ” is used only for input from
PC IN
.
• Using these inputs as audio-exclusive allows you to enjoy audio
and video from separate inputs. Refer to “Playing Audio and
Video from Separate Sources” for details (
➔
page 34 ).
Digital Audio Input
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example, if
you connect your CD player to the
OPTICAL IN 1
, you
must assign “ OPTICAL1 ” to the “ TV/CD ” input selector.
Here are the default assignments.
■
BD/DVD , CBL/SAT , STB/DVR, GAME1, GAME2 ,
PC , TV/CD , PHONO
`
COAXIAL1 , COAXIAL2 , COAXIAL3 ,
OPTICAL1 , OPTICAL2 :
Select the input to which the component has been
connected.
`
- - - - - :
Select if the component is connected to an analog
audio input.
Note
• When an
HDMI IN
is assigned to an input selector in
“ HDMI Input ” (
➔
page 56
), the same
HDMI IN
will be set as
a priority in this assignment. In this case, if you want to use the
coaxial or optical audio input, make the appropriate selection in
the “
Audio Selector ” (
➔
page 70
).
• Supported sampling rates for PCM signals (stereo/mono) from a
digital input (optical and coaxial) are 32/44.1/48/88.2/96 kHz/16,
20, 24 bit.
• “ AUX ” is used only for input from the front panel.
Input selector Default assignment
BD/DVD IN1
CBL/SAT IN2
STB/DVR IN3
GAME1 IN4
GAME2 - - - - -
PC PC IN (Fixed)
AUX FRONT (Fixed)
TV/CD - - - - -
PHONO - - - - -
Input selector Default assignment
BD/DVD COAXIAL1
CBL/SAT COAXIAL2
STB/DVR COAXIAL3
GAME1 OPTICAL1
GAME2 - - - - -
PC - - - - -
AUX FRONT (Fixed)
TV/CD OPTICAL2
PHONO - - - - -