Advanced Settings (Setup Menu)
En-41
Setting item
Default Value
Setting Details
Loudness Plus
On
When the setting is set to "On", it is possible to
enjoy even subtle nuances of audio expression
at low volume� This is only available when the
THX listening mode is selected�
THX Loudness Plus
THX Loudness Plus is a new volume control
technology featured in THX Ultra2 Plus™ and
THX Select2 Plus™ Certified receivers�
With THX Loudness Plus, home theater
audiences can now experience the rich details
in a surround mix at any volume level�
A consequence of turning the volume below
Reference Level is that certain sound elements
can be lost or perceived differently by the
listener� THX Loudness Plus compensates for
the tonal and spatial shifts that occur when the
volume is reduced by intelligently adjusting
ambient surround channel levels and frequency
response� This enables users experience
the true impact of soundtracks regardless of
the volume setting� THX Loudness Plus is
automatically applied when listening in any THX
listening mode� The new THX Cinema, THX
Music, and THX Games modes are tailored to
apply the proper THX Loudness Plus settings
for each type of content�
3� Audio Adjust
Configure various settings related to sound, such as settings for listening to multiplex audio
or multilingual TV broadcasts and sound field settings for listening modes�
Multiplex/Mono
Setting Item
Default Value
Setting Details
Multiplex
Input Channel
Main
Set the audio channel or language to be output
when playing multiplex audio or multilingual TV
broadcasts etc�
"Main": Main channel only
"Sub": Sub channel only
"Main/Sub": Main and sub channels will be
output at the same time�
●
If multiplex audio is being played, "1+1" will
be displayed when Display is pressed�
Mono
Input Channel
Left+Right
Set the input channel to use for playing any 2
ch digital source such as Dolby Digital, or 2-ch
analog/PCM source in the Mono listening mode�
"Left": Left channel only
"Right": Right channel only
"Left + Right" : Left and right channels
Mono
Output
Speaker
Center
Select the speaker to output monaural audio in
the Mono listening mode�
"Center": Audio is output from the center
speaker�
"Left/Right": Audio is output from the front L/R
speakers�
●
If an item cannot be selected even though
connection is correct, check that the settings
in "Configuration" - "Speaker Channels"
matches the number of connected channels�
Dolby
Make the settings for Dolby listening mode�
Содержание DTR-40.7
Страница 31: ...En 31...