Advanced Settings (Setup Menu)
En-39
Level Calibration
Adjust the level of each speaker with the built-in test tone� Settings are automatically
configured if you use the Automatic Speaker Setup�
Setting Item
Default Value
Setting Details
Front Left
0 dB
Select a value between "-12 dB" and "+12 dB"�
A test tone will be output each time you change
the value� Select the desired level�
Center
0 dB
Select a value between "-12 dB" and "+12 dB"�
A test tone will be output each time you change
the value� Select the desired level�
Front Right
0 dB
Select a value between "-12 dB" and "+12 dB"�
A test tone will be output each time you change
the value� Select the desired level�
Height Left
0 dB
Select a value between "-12 dB" and "+12 dB"�
A test tone will be output each time you change
the value� Select the desired level�
●
This setting cannot be changed if
"Configuration" - "Powered Zone 2" is set to
"Yes" and Zone2 is set to on�
Height Right
0 dB
Select a value between "-12 dB" and "+12 dB"�
A test tone will be output each time you change
the value� Select the desired level�
●
This setting cannot be changed if
"Configuration" - "Powered Zone 2" is set to
"Yes" and Zone2 is set to on�
Surround Right
0 dB
Select a value between "-12 dB" and "+12 dB"�
A test tone will be output each time you change
the value� Select the desired level�
Back Right
0 dB
Select a value between "-12 dB" and "+12 dB"�
A test tone will be output each time you change
the value� Select the desired level�
●
This setting cannot be changed if
"Configuration" - "Powered Zone 2" is set to
"Yes" and Zone2 is set to on�
Back Left
0 dB
Select a value between "-12 dB" and "+12 dB"�
A test tone will be output each time you change
the value� Select the desired level�
●
This setting cannot be changed if
"Configuration" - "Powered Zone 2" is set to
"Yes" and Zone2 is set to on�
Setting Item
Default Value
Setting Details
Surround Left
0 dB
Select a value between "-12 dB" and "+12 dB"�
A test tone will be output each time you change
the value� Select the desired level�
Subwoofer
0 dB
Select a value between "-15 dB" and "+12 dB"�
A test tone will be output each time you change
the value� Select the desired level�
●
The speaker "Level Calibration" may be unable to be changed depending on the settings in
"Configuration" - "Speaker Channels" / "Subwoofer"�
●
"Level Calibration" cannot be changed while muting is on�
Equalizer Settings
Adjust the output volume of each range of each connected speaker� You can adjust the
volume of each range of each speaker� You can set three types of equalizer settings in the
Presets 1, 2, and 3�
●
You can adjust the bass in the low range frequencies (63 Hz, etc�), and the treble in the high range
frequencies (16 kHz, etc�)�
●
You can select up to seven frequency bands for each speaker�
Setting Item
Default Value
Setting Details
Front
0 dB
First select the frequency of the speaker from
"25 Hz" to "16 kHz" with the / cursors, then
use / to adjust the volume of the frequency
between "−6dB" to "+6dB".
Center
0 dB
First select the frequency of the speaker from
"25 Hz" to "16 kHz" with the / cursors, then
use / to adjust the volume of the frequency
between "−6dB" to "+6dB".
Height
0 dB
First select the frequency of the speaker from
"25 Hz" to "16 kHz" with the / cursors, then
use / to adjust the volume of the frequency
between "−6dB" to "+6dB".
●
This cannot be selected if "Configuration" -
"Powered Zone 2" is set to "Yes" and Zone2
is set to on�
Surround
0 dB
First select the frequency of the speaker from
"25 Hz" to "16 kHz" with the / cursors, then
use / to adjust the volume of the frequency
between "−6dB" to "+6dB".
Содержание DTR-40.7
Страница 31: ...En 31...
