2
IN-P Installation Guide Index.
SECTION 1. – Description and Ordering Information.
Page 3
SECTION 2. – Specifications.
Page 4
SECTION 3. – Case Schematics.
Page 4
SECTION 4. – Input Jumper Configuration.
Page 5
4.1
–
Position your input Jumpers.
Page 5
SECTION 5. – Wiring.
Page 6
5.1
–
Connect your indicator to the power supply.
Page 6
5.2
–
Wire your IF11 analogue input module.
Page 6
5.3
–
Wire your analogue output (if fitted).
Page 6
5.4
–
Wire your relays (if fitted).
Page 6
5.5
–
Wire your serial port (if fitted).
Page 6
5.6
–
Wire your function pins (if required).
Page 7
5.7
–
Power up your indicator.
Page 7
SECTION 6. – Setup & Calibration.
Page 7
6.1
–
Enter calibration PIN.
Page 7
6.2
–
Input setup.
Page 7
6.3
–
Calibration.
Page 7
6.4
–
Averaging.
Page 8
6.5
–
Analogue output setup.
Page 8
6.6
–
Serial setup.
Page 9
6.7
–
Edit calibration PIN.
Page 9
SECTION 7. – Setpoint Setup.
Page 10
7.1
–
Enter setpoint PIN.
Page 10
7.2
–
Edit setpoints.
Page 10
7.3
–
Edit setpoint PIN.
Page 11
SECTION 8. – Setpoint Direct Access.
Page 11
SECTION 9. – Reset PIN Numbers.
Page 11
SECTION 10. – Display Brightness.
Page 11
SECTION 11. – Display Shortcuts.
Page 11
