Page 46
Page 47
6. Mark position length
The ‘MARK’ position length is the length of your printed ‘MARK’.
Continue to press
or
button, until the LCD displays:
Press
or
button to set b1.00mm to +30.00mm. Precision: ±0.05.
Press
MODE
SET
button to return to the previous menu and press again for 3 seconds to come out of the
CARD OPTION menu and back to standby mode.
7. Groove width
This is the measurement between the card rows. Refer to the provided templates or see Section
2-4-3 to set the groove width measurement.
Continue to press
or
button, until the LCD displays:
Press
or
button to set between 0.00 to 15.00mm. Precision: ±0.05.
Press
MODE
SET
button to return to the previous menu and press again for 3 seconds to come out of the
CARD OPTION menu and back to standby mode.
8. First cutting compensation
This is where the first cut is placed on your card.
When Edge Datum selection is chosen our templates will have this set to 10mm as a default.
LCD display:
If you are using different templates please set this to the measurement of where you would like your
first cut to be. Measure from the edge of the sheet to the top of the first card.
Press
or
button to change the measurement. Precision: ±0.05.
Press
MODE
SET
button and return to previous menu.
9. Mark position compensation
This refers to the measurement between the bottom of the ‘MARK’ and the top (edge) of where the
card is to be cut.
Here our example shows a 2mm gap between the ‘MARK’ and the edge of card to be cut.
To adjust this value press
or
button, until the LCD displays your required measurement.
Precision: ±0.05.
Once your measurement is set press the
MODE
SET
button to return to previous menu and press again for
3 seconds to come out of the CARD OPTION menu and back to standby mode.
10. Card length compensation
The card length compensation is available to adjust the length of your card should it not be cutting
to the correct size as set in the system.
Continue to press
or
button, until the LCD displays:
Содержание ColorCut BC480
