Intec ColorCut BC480, Руководство пользователя

Страница: 19 / 29

Page 34 Page 35
Press or button to move the arrow selection cursor to the CARD OPTION menu and
press the
MODE
SET
button to enter the sub menus as listed.
To navigate through the sub menus for card option press the button.
1. First cutting compensation
This is where the first cut is placed on your card.
All the card presets (except CUSTOM) default to Edge cutting. Datum selection is chosen our
templates will have this set to 10mm as a default.
LCD display:
Press or button to change the compensation value （-5.0 — +5.0mm（
Press
MODE
SET
button and return to previous menu.
2. Mark position compensation
This refers to the gap between the bottom of the ‘MARK’ and the edge of where the next card is to
be cut.
Here our example shows a 2mm gap between the ‘MARK’ and the edge of card to be cut.
To adjust this value press or button, until the LCD displays your required measurement.
Once your measurement is set press the
MODE
SET
button to return to previous menu.
3. Card length compensation
Continue to press button, until you see Card length compensation in the LCD display.
Press or button for compensation setting of -3.0 — +3.0mm（
Press
MODE
SET
button and return to previous menu.
4. Groove width compensation
Your groove width is the gap (measurement in mm) between you card rows. You can apply a
compensation to your width. This is a variable measurement and is dependant on the card template
you have selected and the therefore the card mode.
Continue to press button, until the LCD display:
Press or button for Compensation setting （-3.0 — +3.0mm（
Press
MODE
SET
button and return to previous menu