Page 38
Page 39
Press
or
buttons for compensation setting -3.0 to +3.0mm.
3. Five column blade width
This measurement is set prior to shipping of the BC480. Should you purchase an additional
cassette, this measurement can be changed to match the cassette size - measurements are in mm.
Press
or
buttons, until you reach the cassette measurement.
4. Three column blade width
This measurement should be set prior to shipping of the BC480.
Should you purchase an additional cassette, this measurement can be changed to match that
cassette size - measurements are in mm.
Press
or
buttons, until you reach the cassette measurement (values between 1 —
99mm).
5. First cutting compensation
This is where the first cut is placed on your card.
When Edge Datum selection is chosen our templates will have this set to 10mm as a default.
LCD display:
If you are using different templates please set this to the measurement of where you would like your
first cut to be.
Press
or
button to change the measurement.
Press
MODE
SET
button and return to previous menu.
6. Mark position compensation
This refers to the gap between the mark and the edge of where you want your card to be cut.
Here our example shows a 2mm gap between the ‘MARK’ and the edge of card to be cut.
To adjust this value press
or
button, until the LCD displays your required measurement.
Once your measurement is set press the
MODE
SET
button to return to previous menu.
7. Groove width compensation
Your groove width is the measurement between you card rows. You can apply a compensation
to your width. This is a variable measurement and is dependant on the card template you have
selected and the therefore the card mode.
Continue to press
button, until the LCD display:
Содержание ColorCut BC480
