MoRoS ADSL 2.1 PRO
Functions
In order to configure the authentication with static key, select the radio
button "No authentication or authentication with preshared key". It is
indicated under the option here, whether the static key is present (green
checkmark) or not (red cross). A present key can also be downloaded
(blue arrow) or deleted again (red cross on white box). If no key exists,
the remote terminal will neither be authenticated nor the data traffic
through the OpenVPN tunnel will be encrypted. You can also generate a
new static key using the "Generate a new static key" link. This static key
must then be downloaded and also uploaded to the remote terminal.
Enter the IP address of the local tunnel end into the "IPv4 tunnel address
local" or "IPv6 tunnel address local" field and the IP address of the
remote tunnel end into the "IPv4 tunnel address remote" or "IPv6 tunnel
address remote" field. Enter the address as well as the associated
netmask of the network behind the OpenVPN tunnel into the "IPv4 net
address behind the tunnel" or "IPv6 net address behind the tunnel" and
"IPv4 netmask behind the tunnel" or "IPv6 netmask behind the tunnel"
fields.
In order to confirm all settings made above, click on "OK".
In order to upload a certificate or key, click in the section "Upload key or
certificates" on the "Browse..." button (button depends on the used
browser). Then, select in the "Upload file" window the desired file on the
respective data carrier and click on the "Open" button. If the file is
encrypted, you must also enter the password into the "Password (only
with encrypted file)" field. Click on "OK" then to upload the file.
65
