Functions
MLR 3G 2.0
10.9.5
Configuring SNMP Trap Triggering
The MLR 3G 2.0 can trigger an SNMP trap that sends a message to any recipient on dif-
ferent predefined events. The MLR 3G 2.0 allows to create and manage a series of differ-
ent combinations of recipient and event. The SNMP traps are described in the MIB (Man-
agement Information Base).
Triggering an SNMP trap is only possible if the settings for the SNMP traps are configured
correctly in the menu "Messages" on the page "Configuration".
Configuration with the web interface
In order to enable
triggering of SNMP traps
, check in the menu "Messages" on
the page "SNMP traps" the checkbox "Activate SNMP tarps".
In order to
download the private MIB
, click on the link "Download private
MIB".
In order to
create an SNMP trap
, you have to define this in the section "Create
new SNMP trap". Enter the IP address or the domain name and the associated
port of the recipient into the fields "IP address or domain name : Port" for this.
Select from the drop-down list "Event" the respective event for triggering the
SNMP trap.
Save your settings
by clicking "OK".
In order to
temporarily switch off SNMP traps
, uncheck in the section "Existing
SNMP traps" the check box in the column "active" in the SNMP trap overview.
Click on "OK" to confirm the settings.
In order to
delete one or more SNMP traps
, check in the section "Existing
SNMP traps" the check box in the column "delete" in the SNMP trap overview.
Click on "OK" to confirm the settings.
74
