MLR 3G 2.0
Functions
10.9
Messages
10.9.1
Configuring the Message Dispatch
The MLR 3G 2.0 can send an e-mail or SMS to any recipient on different events or trigger
an SNMP trap. A series of pre-define events are available for this, like set-up of connec-
tions or VPN tunnels for example.
Configuration with the web interface
In order to enable to
send an e-mail
, you must enter the necessary data for
the e-mail account in the menu "Messages" on the page"Configuration" in the
section "E-mail". Enter the e-mail address into the field "E-mail address" for
this. Enter the first and last name of the person holding the e-mail account (or
any text) into the field "Real name". Enter the domain name or the IP address
of the SMTP server into the field "SMTP server" as well as the port, at which
the SMTP server receives e-mails, into the field "SMTP port" (usually port 25).
Enter the user name for the e-mail account into the field "User name" as well
as the associated password into the field "Password".
In order to enable the
SMS dispatch
, you have to enter the number of the SMS
Service Center of your mobile phone provider in the menu "Messages" on the
page"Configuration" in the section "SMS" into the field "SCN (Service Center
Number) SIM card 1". If you use a second SIM card, enter the SCN for this SIM
card into the entry field "SCN (Service Center Number) SIM card 2".
In order to enable to
trigger an SNMP trap
, you must specify the SNMP version
in the menu "Messages" on the page"Configuration" in the section "SNMP
traps". In order to use SNMP v2c, select the radio button "SNMP v2c". More-
over, the community string must be entered into the field "Community". In
order to use SNMP v3, select the radio button "SNMP v3". Moreover, the
community string must be entered into the field "Community". In order to use
an optional SNMP v3 authentication, select the authentication method in the
drop-down list field "Authentication" and enter the password for the authen-
tication (at least 8 characters) into the respective field. In order to use an op-
tional SNMP v3 encryption, select the encryption method in the drop-down
list field "Encryption" and enter the password for the encryption (at least
8 characters) into the respective field. An authentication is pre-condition for
an encryption.
Save your settings
by clicking "OK".
69
