Functions
MLR 3G 2.0
Configuration with the web interface
In order to enable the
modem emulator
, check in the menu "Serial Ethernet"
on the page "Modem emulator" the checkbox "Activate modem emulator".
In order to
enable the echo function using the ATE command
in the modem
emulator, check the checkbox "Enable echo (ATE)".
In order to
disable the answers using the ATQ command
in the modem emula-
tor, check the checkbox "Disable answers (ATQ)".
In order to
enable the verbose answers using the ATV command
in the mo-
dem emulator, check the checkbox "Enable verbose answers (ATV)".
In order to configure the
number of ring tones until call acceptance
, enter the
number of ring tones into the field "Number of rings until connection is an-
swered (ATS0)".
In order to configure the
default answer for unknown commands
, enter this
into the field "Default answer for unknown commands". If nothing is entered
here, the message "ERROR" is returned in case of an unknown or invalid AT
command.
In order to
upload an AT answer file
, click on the "Browse…" button and locate
the respective file. The file will be uploaded after clicking on "OK". This file
must be a text file, which defines an associated answer for each desired AT
command. Each line in this text file defines an "command-answer-pair" in the
form <i="Serial Ethernet Gateway Version 1.0">. The part preceding the "=" in-
dicates the command (here "i" for ati; the "at" must be removed) and the part
following in quotation marks indicates the associated answer (here "Serial
Ethernet Gateway Version 1.0"). In this case, the message "Serial Ethernet
Gateway Version 1.0" would be replied on the ati command. A multi-line an-
swer within the quotation marks is possible Capitalization is ignored. More-
over, the order of the entries must be observed. If an answer for the atxy
command and the atx command is defined for example, the entry for the atxy
command must be entered before the entry for the atx command, because
otherwise the entry for the atx command would be found first and processed
after entering the atxy command, before looking for a aty command, which
does not exist.
In order to
download the current AT answer file
, click on the link "Download
current AT answer file".
Save your settings
by clicking "OK".
68
